Page 2
ABLE OF CONTENTS SECTION PAGE Warranty Safety Instructions and Warnings Grounding Instructions Specifications Operation Storage Maintenance Troubleshooting Disposal/Environmental protection Thank you for purchasing this Vacmaster® air mover. Feel confident that with Vacmaster® you are obtaining a high-quality product engineered for optimal performance.
Page 3
ARRANTY edges, by jamming, or by pulling on the cable. Vacmaster® takes pride in producing a high quality, durable product. This • Before each use, check the power supply lead and the extension cable for Vacmaster® product carries a limited two (2) year warranty against defects damage and ageing.
Page 4
• Do not put any object into intake openings. • Never operate this air mover with intake grills removed or intake openings PERATION blocked. GETTING TO KNOW THE AIR MOVER • This air mover is equipped with an over-load protection device which may shut down the unit during operation.
Page 5
GENERAL USE INSTRUCTIONS PERATION (CONTINUED) 1. Verify that the 3-speed on/off switch is set to "0" (OFF) and the cord is unplugged. OPERATIONAL POSITIONS 2. Place the air mover in the desired position on a stable surface. Ensure there is at least a foot of clearance on each side of the air mover. Avoid placing the air mover where loose fabric, sheets, or other objects can get pulled onto the intake grills.
Page 6
CORD STORAGE TORAGE Before storing the air mover, ensure the power switch is turned to the OFF position, and unplug the unit from the power outlet. Wrap the cord around the base of the handle. Use the attached cord clip to hold the cord in place. STORING THE AIR MOVER To conserve space while storing multiple units, this air mover can be stacked together with multiple additional units, as illustrated below.
Page 7
1) The blower wheel has 1-2) Have air mover inspected ROUBLESHOOTING Air Mover dirt build up. by a professional. runs but with 1) Have blower wheel cleaned excessive 2) The blower wheel is WARNING! by professional. TO REDUCE THE RISK OF ELECTRIC SHOCK UNPLUG damaged or the motor vibration.
Need help?
Do you have a question about the AM1502 and is the answer not in the manual?
Questions and answers