Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for V2 ECO-LOGIC
Summary of Contents for V2 ECO-LOGIC
- Page 1 ZIS256 IL 331 EDIZ. 14/11/2018 ECO-LOGIC KIT ALIMENTAZIONE SOLARE KIT ALIMENTAÇÃO SOLAR SOLAR POWER KIT KIT SOLARSTROMVERSORGUNG KIT ALIMENTATION SOLAIRE KIT STROOMVOORZIENING DOOR ZONNECELLEN KIT DE ALIMENTACIÓN SOLAR...
-
Page 3: Eu Declaration Of Conformity
V2 assistance service; use of the device under such conditions may be hazardous. As indicated by the symbol opposite, throwing away this product as domestic waste is strictly forbidden. -
Page 4: Technical Information
PRELIMINARY CHECKS TECHNICAL INFORMATION AND LIMITS OF USE Accumulator unit Voltage output toward the 24-28Vdc* Perform the checks described in this chapter to ensure that the control unit product is suited to the characteristics of the automation device to be supplied. Maximum current Battery capacity 18Ah... -
Page 5: Description And Intended Use
ECO-LOGIC must have the mode of operation ENERGY grey connector from the accumulator SAVING active. • Exclusively use the panel with code 172801 provided by V2 To ensure proper operation of the system, all the added accessories must be connected to the accessory output of •... -
Page 6: Installation
INSTALLATION CAUTION: do not connect the grey terminal until 5. Connect the panel to the grey connector fixed to the installation of the panel is complete. accumulator unit: • Loosen screw A and extract the connector 1. Fix the bracket to the wall using appropriate rawplugs •... - Page 7 POSITIONING THE PANEL Position the panel facing south, with inclination L with respect to the horizontal axis equal to the latitude of the installation location. PLEASE NOTE: If the installation is in the southern hemisphere, the panel should be facing north. Considering it is preferable to obtain maximum yield during the winter (when there are less hours of sunlight), we recommend the inclination L be increased by several degrees, for better panel...
-
Page 8: Replacing The Batteries
NOTIFICATIONS REPLACING THE BATTERIES The battery charge status is displayed by means of LEDs located PLEASE NOTE: the batteries should only be replaced by on the front of the box. qualified technical staff Checking must be performed with the gate resting. Replacement of the accumulators becomes necessary when The yellow LED flashes to indicate the batteries are charging;... - Page 9 V2 S.p.A. Corso Principi di Piemonte 65/67 12035 RACCONIGI CN (ITALY) Tel. +39 0172 812411 - Fax +39 0172 84050 info@v2home.com www.v2home.com...
Need help?
Do you have a question about the ECO-LOGIC and is the answer not in the manual?
Questions and answers