1. Manuals
  2. Brands
  3. Curv360 Manuals
  4. Security System
  5. MS-06B
  6. Manual

Curv360 MS-06B Manual

Hide thumbs
1
2
3
4
5
6
Table of Contents

Advertisement

Quick Links

Download this manual
MS-06B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MS-06B and is the answer not in the manual?

Questions and answers

Summary of Contents for Curv360 MS-06B

  • Page 1 MS-06B...
  • Page 2 When your alarm system detects an intrusion, the MS-06B rings out and its strobe lights turn on. The MS-06B can also be used as a standalone alarm system by registering wireless accessories in the siren. 2. Design...
  • Page 3 Power Switch Setting Connection 3. Power ON/OFF the Siren Power ON: press and hold the power switch until lights on, the siren is on. Power OFF: press and hold the power switch until lights off, the siren is off. 4. Enter/exit connection mode Enter connection mode: short press the connection button, the Blue LED will be light on.
  • Page 4 If the siren is used as an additional siren, it must be registered to your alarm control panel. If the alarm is triggered, the MS-06B will ring out and its LED lights will turn on. How to connect the siren with the control panel 1.
  • Page 5 Test Press the “Arm” button of the remote control. The Red LED of the MS-06B blinks every 5seconds: the connection is successful. Trigger a sensor that is already connected to the siren, the siren will ring out. If not, the connection...
  • Page 6 7. Set Siren alert time Short press the Setting button to set siren duration time to 1/2/3 minutes. 8. Reset It is recommended to reset the siren if you were lose one of the accessory, especially if you have lost your remote control.

Table of Contents