Introduction - Rossum CONTROL FORGE Operation Manual

1. Introduction

Thanks for purchasing (or otherwise
acquiring) the Rossum Electro-Music
Control Forge Programmable Universal CV
Generator.
This manual will give you the information you
need to get the most out of Control Forge.
However, the manual assumes you already
have a basic understanding of synthesis and
synthesizers. If you're just starting out, there
are a number of good reference and tutorial
resources available to get you up to speed.
One that we highly recommend is:
Power Tools for Synthesizer Programming
(2nd Edition)
By Jim Aikin
Published by Hal Leonard
HL00131064
Support
In the unlikely event that you have a problem
with your Control Forge, tell us about it here:
http://www.rossum-electro.com/support/
support-request-form/
... and we'll get you sorted out.
If you have any questions, comments, or just
want to say "Hi!," you can always get in touch
here:
http://www.rossum-electro.com/about-2/
contact-us/
... and we'll get back to you.
Happy music making!
| 3