Advertisement
Advertisement
Table of Contents
Summary of Contents for Air Oasis AHPCO
- Page 1 3401 Airway Blvd. ® Amarillo, Texas 79118 806-373-7788 feedback@airoasis.com AHPCO® Cell Replacement Instructions: The Complete Guide NOTE: Before you begin please unplug the unit from it's power source. Required Tools: Phillips head screwdriver or drill with Phillips head bit or 1/4” socket.
- Page 2 CAUTION from the base of the unit. UV lamp may be hot and could cause serious burns if not handled properly. Please wait until AHPCO® Cell has cooled to room temperature to remove from unit. 4. Plug the new AHPCO®...
- Page 3 Required Tools: Phillips head screwdriver or drill with Phillips head bit or 1/4” socket. 1. Remove the screws on the 3. Pull the AHPCO® Cell Up and 2. Using a 1/4” socket, in a drill or sides of the brushed aluminum...
- Page 4 CAUTION UV lamp may be hot and could cause serious burns if not handled properly. Please wait until AHPCO® Cell has cooled to room temperature to remove from unit. 4. Connect the lamp connector 5. After you attach the AHPCO®...
- Page 5 CAUTION UV lamp may be hot and could cause serious burns if not handled properly. Please wait until AHPCO® Cell has cooled to room temperature to remove from unit. 4. Connect the lamp connector 5. After you attach the AHPCO®...
- Page 6 CAUTION UV lamp may be hot and could cause serious burns if not handled properly. Please wait until AHPCO® Cell has cooled to room temperature to remove from unit. 4. Connect the lamp connector 5. Plug in the AHPCO® Cell, slide 6.
Need help?
Do you have a question about the AHPCO and is the answer not in the manual?
Questions and answers