Advertisement
INSTRUCTION MANUAL
ELECTRIC
ENGRAVER
054-4605-0
s
Read and understand this instruction manual
thoroughly before using the product. It contains
important information for your safety as well as
operating and maintenance advice.
Keep this instruction manual for future use.
Should this product be passed on to a third
party, this instruction manual must be included.
General safety rules
!
WARNING:
Read and understand all
instructions.
Work area
Electrical safety
Personal safety
Use and care of power tools
KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE
Service
Specific safety rules
!
WARNING:
!
WARNING:
!
WARNING:
Replacing the engraving tip
Fig. 1
Advertisement
Table of Contents
Summary of Contents for MasterCraft 054-4605-0
- Page 1 Service INSTRUCTION MANUAL ELECTRIC ENGRAVER Specific safety rules 054-4605-0 Personal safety WARNING: Read and understand this instruction manual thoroughly before using the product. It contains important information for your safety as well as operating and maintenance advice. WARNING: Keep this instruction manual for future use.
- Page 2 Setting the depth control three years from the date of original retail purchase NOTE: These warranties are subject to the following conditions and limitations: Fig. 2 Operating the engraving tool WARNING: Additional Limitations Fig. 3 Notice to Consumer NOTE: TOLL-FREE HELPLINE: 1-800-689-9928 Fig.
Need help?
Do you have a question about the 054-4605-0 and is the answer not in the manual?
Questions and answers