Summary of Contents for KJB PRO-10G
- Page 1 PRO-10G Thank you very much for your PRO-10G purchase. Please read this user manual carefully before using in order to understand all functions and use properly. Be sure to keep this user manual in secure possession for future reference...
- Page 2 Name of each part & Composition of the product ① ⑥ ⑦ ② Tel. Line Adapter ⑧ ⑨ ③ ⑩ ④ ⑪ ⑤ ⑫ ⑬ Headphone ⑭ <PRO-10G MAIN BODY>...
- Page 3 Headphone: Jack for connecting to Headphone Power Switch Speaker out: It is used when White Noise sound is put out to external speakers (can be purchased seperately) Tel out: Jack for connecting to the phone Tel in: Jack for connecting to the telephone line Horizontal Bar Graph Display: RF Signal Strength Meter RF warning: Light is ON when the wireless signal is transmitting TEL warning: Light is ON when the phone is being wiretapped...
-
Page 4: How To Operate
For Detecting all "wireless transmitting devices" &/or "wireless transmitting spy cameras" within detection range How to operate 1. Silence Detection: can detect the wireless wiretaps and wireless cameras by using only LED sensitive display 1. Turn on 2.Sensitivity 3. Move towards direction of display as sensitivity display LED (10 the switch... - Page 5 - ALL GPS Trackers while Transmitting - ALL Bluetooth Active Bugging Devices - ALL Spy Phones with Active Bluetooth/Wi-Fi -ALL Wireless Transmitting Video Cameras up to 5.8 Ghz PRO-10G has Detection range up to 35-40 feet depending on Power of Transmitting source...
- Page 6 2. Detection using RF alarm feature It works exactly as #1 Silence Detection, though Speaker now Alerts ● When getting closer to wireless signal the sound beeps (faster). ● When it is very close to the wiretaps the "beep" sound is heard. 4.
- Page 7 3. Detection using Headphone It works together with #1 Silence Detection. It detects while listening ● with headphone, As it is closer to wiretaps the sound varies (faster). When it is very close to it the "beep" sound is heard. 3.
- Page 8 4. Noise Function Audio Tapping prevention mode Used for preventing wire/wireless tapping, laser tapping, recording by voice recorder, recording by tape recorder, tapping by parabolic reflector, tapping by hidden tapping device in wall. 2. Press the 3. Noise and 1.Turn on speaker mode speaker’s the switch...
- Page 9 1. Check and prepare 2 types of telephone cables and cable connector bundled together. 2. Disconnect the telephone cable from the telephone you want to search. 3. Open the rubber cover on the side of PRO-10G.
- Page 10 Connect the other end of the black cable which is connector to the TEL IN terminal on the PRO-10G as shown in the picture. Connect one end of the white cable to TEL OUT terminal on the PRO-10G and the other end to inlet terminal of the telephone that you disconnected in above step “2”...
- Page 11 Manufacturer assumes no liability if instructions are not followed...
- Page 12 Do not touch the body of the device when there is lightning and thunder. It may cause electric shock by lightning.