Download Print this page

Party Light & Sound PARTY-200UHF-MKII User Manual

2-channel uhf microphone system
Hide thumbs Also See for PARTY-200UHF-MKII:

Advertisement

Quick Links

PARTY
LUMIERE DJ
MICROS - 200UHF -
MKII
MANUEL D'UTILISATION
PROLINE
REFRIGERATEUR
BRF40
Besoin d'aide ?
Rendez-vous sur votre communauté https://sav.darty.com

Advertisement

loading

Summary of Contents for Party Light & Sound PARTY-200UHF-MKII

  • Page 1 PARTY LUMIERE DJ MICROS - 200UHF - MKII MANUEL D'UTILISATION PROLINE REFRIGERATEUR BRF40 Besoin d'aide ? Rendez-vous sur votre communauté https://sav.darty.com...
  • Page 2: Navodila Za Uporabo

    2-CHANNEL UHF MICROPHONE SYSTEM User Manual SYSTEME DE MICROPHONE UHF Manuel d’Utilisation UHF FUNKMIKROFONSYSTEM Bedienungsanleitung DRAADLOOS UHF MICROFOON SYSTEEM Handleiding 2-KANALNI UHF MIKROFONSKI SISTEM NAVODILA ZA UPORABO SISTEMA DE MICROFONO UHF MANUAL DE INSTRUCCIONES SISTEMA MICROFONICO UHF MANUALE DI ISTRUZIONI Ref. PARTY-200UHF-MKII...
  • Page 3 INSTRUCTION MANUAL Important Safety instructions and danger warnings ⠗Please read the manual carefully and keep it for future reference. ⠗All safety instructions and warnings must be adhered to. They are part of the manual and must be kept with the manual.
  • Page 4: System Features

    SYSTEM FEATURES ⠗Simultaneous output use: Unbalanced 6.35mm jack plug and balanced XLR output connectors may be used simultaneously to different external devices. ⠗Range: UHF series transmitters will work at a distance of up to 30m from the receiver. ⠗Noise squelch: Squelch circuit analyzes signal strength and quality to avoid interference due to environmental RF noise.
  • Page 5: Transmitter Battery Installation

    TRANSMITTER BATTERY INSTALLATION Push the battery cover open. Insert 2x AA batteries into the battery compartment with the correct polarity. Close the battery cover. SYSTEM CONNECTION 1. Receiver power connection: Connect the DC connector of the supplied AC/DC adaptor to the DC input socket on the receiver.
  • Page 6: System Specifications

    Momentary loss of Signal indicators A/B on the receiver Reposition receiver and perform walk-through test sound as trans- are off when the sound is lost again. If audio dropouts persist, mark “dead” spots mitter is moved and avoid them during performance around the perfor- ming area SYSTEM SPECIFICATIONS...