Electrical Connection; Start-Up Of The Cabinet - Delta ERD14 User Manual

Electrical connecting
The cabinet operates on 230 V/50 Hz.
The wall socket should be easily accessible.
All earthing requirements stipulated by the local electricity authorities must
be observed. The cabinet plug and wall socket should then give correct
earthing. If in doubt, contact your local supplier or authorized electrician.
The flexible cord fitted to this appliance has three cores for use with a 3-pin
13-Amp or 3-pin 15- Amp plug. If a B.S. 1363 (13-Amp) fused plug is used,
it should be fitted with a 13-Amp fuse.
The wires in this mains lead are coloured in accordance with the following
code: Green/Yellow: Earth, Blue: Neutral, Brown: Live.
The main electrical connections must be done by skilled electricians.

Start-up of the cabinet

Before use, we recommend that the cabinet is cleaned, (see the section on
maintenance and cleaning).
Important!
If the cabinet has been vertically placed during transport,
please wait 2 hours before starting up the cabinet.
Connect the cabinet to a socket and turn on the
switch on the control panel, see fig. 1.9.
Fig. 1.9
4