1. Manuals
  2. Brands
  3. Anytron Manuals
  4. Cutter
  5. Any-cut1
  6. User manual

Anytron Any-cut1 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Bitek Technology, Inc.
Any-cut1
User Manual
AnyTron. Convenient Laser Die-cutter
Ver 1.0.0 (01
March
2016
-
-
)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Any-cut1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Anytron Any-cut1

  • Page 1 Bitek Technology, Inc. Any-cut1 User Manual AnyTron. Convenient Laser Die-cutter Ver 1.0.0 (01 March 2016...
  • Page 2 ANYTRON ANYCUT1 User Manual Bitek Technology Revision history Date Description 20160306 Initial release © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 2 of 120...

  • Page 3: Table Of Contents

    ANYTRON ANYCUT1 User Manual Bitek Technology Contents Summary ......................................6 Anycut1 Installation ..................................6 Components for Installation ............................6 Installation Environment ..............................7 How to Install ..................................8 2.3.1 Cable ....................................8 2.3.2 Dust Collector ................................10 Anycut Operation ..................................12 Hardware ....................................12 3.1.1 Media Set up ................................12...
  • Page 4 ANYTRON ANYCUT1 User Manual Bitek Technology 3.2.2 What is Beamcut ................................45 3.2.2.1 The configuration of BeamCut ........................45 3.2.2.2 The function of Beamcut ..........................45 3.2.3 Auto Vision SW for Vision ............................62 3.2.3.1 How to register the vision mark in the vision camera ..............62 3.2.3.2 How to Apply the vision setting value to Beamcut ................66...
  • Page 5 ANYTRON ANYCUT1 User Manual Bitek Technology When the media is not feeding straightly ......................92 When the origin for cutting is not correct (How to set the origin) ............93 When the laser does not work .............................94 When the laser power is weaker than normal ......................96 When laser stays at the same position without moving.

  • Page 6: Summary

    ANYTRON ANYCUT1 User Manual Bitek Technology 1. Summary A The Anycut is roll to roll laser cutting system that is specialized in making Short-run label. It was designed to run the machine in the minumum space due to the compact size D1620 X W630 X H503 mm and it solved the spacial limitation that an existing big roll to roll machine has.

  • Page 7: Installation Environment

    ANYTRON ANYCUT1 User Manual Bitek Technology LASER Cable SCANNER Cable VISION Cable (Monitor, mouse, keyboard included)) Duct Hose Size – Ø100 (for dust collector) Allen Wrench Dust Collector Option 2.2 Installation Environment This equipment is to be installed in place of the temperature / humidity criterion is fulfilled.

  • Page 8: How To Install

    ANYTRON ANYCUT1 User Manual Bitek Technology Division Requirements Contents Temperature 15 - 25˚C Environment Humidity 40 – 60% RH Horizontal angle 0 ˚ Stacking Minimum size 1620 x 660 이상 Shelves The minimum load bearing 500 Kg 2.3 How to Install 2.3.1...
  • Page 9 ANYTRON ANYCUT1 User Manual Bitek Technology ※ When a cable is unplugged Cable Symptom Note Error message ① RS231 Cable 'Serial cable' or 'COM port' Vision camera power off ② Vision Cable Impossible to detect the vision on Vision S/W...

  • Page 10: Dust Collector

    ANYTRON ANYCUT1 User Manual Bitek Technology External D.C Cable B None None None None None 2.3.2 Dust Collector A dust collector is used for the purpose of discharging the dust and smoke generated during the cutting operation and in some cases, it may require regular filter cleaning or replacement.
  • Page 11 ANYTRON ANYCUT1 User Manual Bitek Technology Set the flexible hose(100 Ø) at the dust hall like a picture and fix the hose by using Tie. Connect the other side hose in the side hall of the dust collector. * Connect Ø100 hose to the hall of Ø65 dust collector hall...

  • Page 12: Anycut Operation

    ANYTRON ANYCUT1 User Manual Bitek Technology 3. Anycut Operation 3.1 Hardware 3.1.1 Media Set up For Anycut1, the Max media width to set is 215mm. when you set the narrow paper less than 200mm, it recommends the center alignment of the media in order to use the higher quality according to the characteristics of the laser.
  • Page 13 ANYTRON ANYCUT1 User Manual Bitek Technology Set Media like the marked path of Anycut web path. Media Width more than 200mm : left array / less than 200mm / center array Left array Center array set the ring guide as 215mm.
  • Page 14 ANYTRON ANYCUT1 User Manual Bitek Technology ※ How to Operate the Winder When the media installation is completed, press the marked button to operate Unwinder. Press marked button to operate Reinwder button. B. How to Set Lamination film © 2016 Bitek Technology. All rights reserved.
  • Page 15 ANYTRON ANYCUT1 User Manual Bitek Technology Width of Lamination film: Narrow 5mm longer than the label media use is recommended. ※ Set lamination film like the marked path of Anycut web path. Pull the laminaton film according to the path...
  • Page 16 ANYTRON ANYCUT1 User Manual Bitek Technology When media is at the center of the cutting pad, lock the press roller. After then, feed the media by pressing F button again and the lamination film will be sticked on the media normally.

  • Page 17: Black Mark Sensor Tuning

    ANYTRON ANYCUT1 User Manual Bitek Technology Attach the seperated waste paper to the waste removal part along the path, and attach the back linear paper to the core installed Rewinder. ※ Please refer to this manual 3.1.4 ‘How to Tune Waste removal part' to get in more detail information.

  • Page 18: How To Check Sensor Tune

    ANYTRON ANYCUT1 User Manual Bitek Technology When the orange light is flashed in the LED on the sensor, press auto set button for 1 second again. 3.1.2.1 How to check Sensor Tune If user missed sensor tuning process or tune the sensor incorrectly, it may be difficult to operate the machine normally.
  • Page 19 ANYTRON ANYCUT1 User Manual Bitek Technology when the sensor is on the black mark of the next page, the media is stopped and sensor LED is turned on. It means the sensor tuning is correct. When the sensor is on the black mark, Sensor LED is turned on.

  • Page 20: How To Set Vision Camera

    ANYTRON ANYCUT1 User Manual Bitek Technology If you experience any one of the above, you should tune the sensor again. ※ ※ Please refer to this manual 17p,'Black Mark Sensor Tuning' How to use Rear Sensor User can use the rear sensor by using the swtich that is isntalled in the left side wall of the machine.

  • Page 21: Waste Removal Part Tuning

    ANYTRON ANYCUT1 User Manual Bitek Technology - Vision is only for Stop and Go mode - Vision Mark can be designed 3 x 3mm black square (K 100%) Make the vision mark be under the camera by pressing F and F1 button one by one in the right panel.

  • Page 22: How To Use Slitter

    ANYTRON ANYCUT1 User Manual Bitek Technology ※ How to tune the waste removal part Push the tension clutch and fix the core. Next, turn the volume knob and fix the position of the tension clutch. Turn the volume knob to the anti clock - wise and control the tension of the waste paper.
  • Page 23 ANYTRON ANYCUT1 User Manual Bitek Technology Install the media while it is openend the slitter cover. When the media installation is completed, close the slitter cover and raise the lever. © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06...
  • Page 24 ANYTRON ANYCUT1 User Manual Bitek Technology Slitter tuning is completed. ※ How to Replace Slitter Remove the makred bolt by using the driver and remove the knife to be replaced. © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06...

  • Page 25: The Principle Of Web Cleaner Operation

    ANYTRON ANYCUT1 User Manual Bitek Technology Install new knife and tighten the bolt. knife replacement completed. 3.1.6 The principle of Web Cleaner Operation The Web Cleaner is consisted of the sticky paper roller that is to remove the dust of the media during the cutting and the cleaning roller to remove the dust of the paper roller.

  • Page 26: Software

    ANYTRON ANYCUT1 User Manual Bitek Technology <Web Cleaner> <Web Cleaner 회전 방향> 3.2 Software The software to run Anycut is divided into Illustrator Plug in program and Beamcut program to control the station. Anycut operates through the communication between them.
  • Page 27 ANYTRON ANYCUT1 User Manual Bitek Technology ※ The cutting working area width for Anycut is designed as 210mm. Thus, when user uses the narrow width media, they can change the width of ArtBoard as 210mm to make an image can be at center of the media width to operates the machine more convenient.
  • Page 28 ANYTRON ANYCUT1 User Manual Bitek Technology Change the anchor point to the top of the central location ArtBoard. Change the anchor point to the top of the central location ArtBoard. Change the anchor point of ArtBoard to the top left corner and change the X position as 0.

  • Page 29: Path Sequence Of Layer

    ANYTRON ANYCUT1 User Manual Bitek Technology setting ArtBoard completed. 3.2.1.2 Path Sequence of Layer The laser moves along the path sort order of each layer that is designed in Illustrator. therefore,designe the path sort order of layer like Hangul 'ㄹ' or letter 'S to make the laser moving speed and the working time to cut can be saved.

  • Page 30: Plug In Program

    ANYTRON ANYCUT1 User Manual Bitek Technology 3.2.1.3 Plug in Program The plug in programs are installed in Illustrator installed in Anycut PC. user can set the laser power and marking speed. Also, they can use the laser that has different setting at the same time via this plug in program.
  • Page 31 ANYTRON ANYCUT1 User Manual Bitek Technology 1) PARAMETERS PARAMETERS is used for the purpose of controlling the laser power and speed of the laser marking. This menu is devided into 2 parts for delays that control laser power and cutting quality.
  • Page 32 ANYTRON ANYCUT1 User Manual Bitek Technology ※ Generally, Bitek Technology recommend users use default value about all parameter settings, except Mark speed ③ Jump Speed: The speed that laser moves to the next cutting line In Anycut, it uses 500 to 700 values.
  • Page 33 ANYTRON ANYCUT1 User Manual Bitek Technology ② Mark Delay When Mark Delay is too short (Example 2) If Mark Delay is too short, even if the reflector cannot be reach the destination, when the commmand for the next vector starts, the laser will move to the next vector and start to mark.
  • Page 34 ANYTRON ANYCUT1 User Manual Bitek Technology <Example 3> When Polygon Delay is too long (Exampl 4) If Polygon Delay is too long, the reflector is stopped at the final destination of the vector, because of this, the 'burn-in' phenomenon can be generated in there.
  • Page 35 ANYTRON ANYCUT1 User Manual Bitek Technology <Example 5> When Laser On Delay is too long (Example 6) If Laser On Delay is too long, despite the reflector already moved as it needs, the laser does not be started. It means that the laser starts to work late than normal, it can cause the problem as below.
  • Page 36 ANYTRON ANYCUT1 User Manual Bitek Technology <Example 7> When Laser OFF Delay is too long (Example 8) If Laser Off Delay is too long, the laser is finished late than normal to be finished and it can cause the problem as below.
  • Page 37 ANYTRON ANYCUT1 User Manual Bitek Technology <MARKING> ※ How to apply laser setting depends on Layer Check the name of each layer to cut. © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 37 of 120...
  • Page 38 ANYTRON ANYCUT1 User Manual Bitek Technology Enter the different Parameter No. every layer in Marking menu and press Apply button. Enter the setting value according to Parameter No.and press Apply button in Marking menu. Change the setting in Parameter window and select its Parameter No.in Marking window.
  • Page 39 ANYTRON ANYCUT1 User Manual Bitek Technology Send a job to check it is applied or not. It's an example that is applied settings above. 3) Hatching Hatching is a function to fill the empty inner space of the vector with special laser patterns.
  • Page 40 ANYTRON ANYCUT1 User Manual Bitek Technology < The inner area of the vector is empty > < The inner area is filled with patterns > © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 40 of 120...
  • Page 41 ANYTRON ANYCUT1 User Manual Bitek Technology <HATCHING> PARTⅠ  ① Outline: It converts bezier curves in AI to the vector. ② Seg. No: It defines the number of vector. ③ Seg. Len: It converts bezier curves to the vector by cutting as input length.
  • Page 42 ANYTRON ANYCUT1 User Manual Bitek Technology <Example2> PARTⅡ  ① Type: The type of a pattern to fill through the extracted vector. ② Bind: Area to apply Hatching function ※ See example below <Union> <Intersection> <XOR> ③ Distance: Define the distance between Hatchinig lines ※...
  • Page 43 ANYTRON ANYCUT1 User Manual Bitek Technology <Example2. Distance: 3> ④ Angle: Define the angle of Hatching lines ※ See example below <Example1. Angle: 45> <Example2. Angle: 90> © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document...
  • Page 44 ANYTRON ANYCUT1 User Manual Bitek Technology ※ How to Apply Hatching Windows > Anytron plug in> Hatching Open Hatching menu Select area apply Hatching. Selecte or enter the setting according to the designe and click Hatching button to apply. © 2016 Bitek Technology. All rights reserved.

  • Page 45: What Is Beamcut

    ANYTRON ANYCUT1 User Manual Bitek Technology Hatching function is applied. 3.2.2 What is Beamcut If the plug in programs are for laser setting, the BeamCut is to control the station. 3.2.2.1 The configuration of BeamCut It can enter the job quentity and send jobs or stop it.
  • Page 46 User must send the first job from Illustrator. because Beamcut does not have any information before user sends a job in Illustrator. After Beamcut gets the information from Illustrator, the image to cut will be shown in Beamcut screen, instead Anytron logo. < Relation between Beamcut and Illustrator >...
  • Page 47 ANYTRON ANYCUT1 User Manual Bitek Technology <Beamcut Exit Menu> 1) Open / Save In Beamcut, it can save the image for cutting and laser setting according to its image. also, it can open them, too. In this case, user does not have to run Illustrator to open images to cut or set the laser.
  • Page 48 ANYTRON ANYCUT1 User Manual Bitek Technology Enter the name to save. Save it as 'abc' format. ※ Open 방법 Run Beamcut > File > Open © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 48 of 120...
  • Page 49 ANYTRON ANYCUT1 User Manual Bitek Technology Open the saved file. The cutline is shown that has saved in Beamcut screen. Send jobs by pressing Play button. ※ The setting when using Save function in Beamcut The information that is saved in plug in (Parameter, Marking, Hatching) and Beamcut.
  • Page 50 Bitek Technology ANYTRON ANYCUT1 User Manual < Setting - Control CARD > In Contorl Card menu, it can set the scale calibration file can change the angle of the cutting and scale. <Control Card> Master/Slave: The scale calibration file installation...
  • Page 51 ANYTRON ANYCUT1 User Manual Bitek Technology Status: If the status message is shown as 'PSC141P Normal', it works correctly. ※ When status message is shown 'PSC Open Board', How to solve ① Set the path of Hex file and calibration file again.
  • Page 52 ANYTRON ANYCUT1 User Manual Bitek Technology <Setting - Marking Information> PARTⅠ  Op. Mode: To select the cutting mode ① On the fly: In On the fly, the laser cutting and media feeding are done at the same time, the Mark Speed and Feeder Speed should be defined as proper values depends on the cutting images and thickness of the media.
  • Page 53 ANYTRON ANYCUT1 User Manual Bitek Technology PART Ⅱ  ① Blank Cut On/Off: It is used to cut repeatedly the same contour line without black mark. Mainly, it is used for making PreCut label. Also, it is used for cutting the same pattern repeatly in special media like a reflective material, too.
  • Page 54 ANYTRON ANYCUT1 User Manual Bitek Technology <Illustrator 에서 라벨 상하 간격(Gap) 설정하기> PART Ⅲ  ① Vision On/Off: To select the Vision On/Off. (How to use Vision: please refer to 3.2.3 Auto Vision S/W for Vision) ※ Precaution: The vision is only for Stop and Go PART Ⅳ...
  • Page 55 ANYTRON ANYCUT1 User Manual Bitek Technology - Stop and Go: 210mm, - On the fly : 80mm ※ long label cutting video - https://drive.google.com/a/bitekps.com/file/d/0B6Xow7ZbWtMwYzU0RHFzRnZydlE/view?usp =sharing ④ Page Length: Genrally, it means the length of ArtBoard in Illustrator. it should be the same with the distance of the printed black mark.
  • Page 56 ANYTRON ANYCUT1 User Manual Bitek Technology <Picture A> <Picture B> <Picture A>: The cutting posiiton about the first image is correct, but when we look overall cutting poistion, the cut line is going down more and more. In other words, it means that the media feeding amount is too much.
  • Page 57 ANYTRON ANYCUT1 User Manual Bitek Technology it means that the second cut line cuts at the back than the iamge area where has to cut actually, because the data moving amount is too much. In this case, Feeder Adjust needs to be decreased and it will be solved.
  • Page 58 ANYTRON ANYCUT1 User Manual Bitek Technology ⑦ Vision Wait Time: If the next black mark does not come within the Vision wait Time is set in Beamcut, 'Vision Time Out' error message can be generated. Now, for Anycut, it is using 5 ~ 10sec generally for Vision Wait Time.
  • Page 59 ANYTRON ANYCUT1 User Manual Bitek Technology ① Blower: It is an unused function now. (It is for Anycut, not Anycut1) 2-3) RS232 <Setting – RS232> Set the Serial Port to comunicate machine with PC. <RS232> If the number specified in the Serial Port Serial Port associated with the BeamCut do not match, ©...
  • Page 60 ANYTRON ANYCUT1 User Manual Bitek Technology If the number specified in the Serial Port and the Serial Poart number associated in with Beamcut do not mactch, it's impossible to send a job because the machien and program does not communiate and it makes an error as below. (when Serial cable mounting is not perfect, the same erorr is generated) <COM port Error 메시지>...
  • Page 61 ANYTRON ANYCUT1 User Manual Bitek Technology BeamCut> RS232 Select the same port number that has founded in step2 in Beamcut. 2-4) Option: When it adjusts the cut line position by joysitck, set the offset increment. < Setting - Option >...

  • Page 62: Auto Vision Sw For Vision

    ANYTRON ANYCUT1 User Manual Bitek Technology After checking the cutting position, you can slit the media by using duty and feeder speed you want with [▶] button. <Slitting> 3.2.3 Auto Vision SW for Vision In Anycut, it is using the vision system to correct the printed margin and the user needs to do some special setting in Auto Vision program.
  • Page 63 ANYTRON ANYCUT1 User Manual Bitek Technology Run Auto vision software in the desktop of the PC and select the Vision in Connect menu. *After the machine is turned on, the vision camera will be worked with the beep sound after 30 secs.
  • Page 64 ANYTRON ANYCUT1 User Manual Bitek Technology Click Image tap and adjust the calibraion values to make the mark be more clear to see. * Since the amount of light reflected each media differetn, it needs to do step4 again whenever the media type is changed.
  • Page 65 ANYTRON ANYCUT1 User Manual Bitek Technology Save the vision value in the camera by selecting the marked icon. saved overwriting or clicking New Slot for new save. when it is saved, it should be saved every type of media. White PET...

  • Page 66: How To Apply The Vision Setting Value To Beamcut

    ANYTRON ANYCUT1 User Manual Bitek Technology 3.2.3.2 How to Apply the vision setting value to Beamcut Run Auto vision program in the desktop of the PC and select the vision in Connect tap. * The vision camera will work after...
  • Page 67 ANYTRON ANYCUT1 User Manual Bitek Technology Click Image tap and adjust the Calibration values to see the black mark more clearly. * Since the amount of light transmitted is different depending on a media type it needs to set step 4, whenever the media type is changed.
  • Page 68 ANYTRON ANYCUT1 User Manual Bitek Technology Divide the width of the black mark that is printed actually to the width of the black mark that is measured in the Vision. 3/50.903 = 0.059 (Round off the numbers to four decimal places.)
  • Page 69 ANYTRON ANYCUT1 User Manual Bitek Technology Select the On in Vision On/Off menu and enter the values for X and Y. (X = Width, -0.059 / Y = Height, -0.070) * Insert (-) mark when it enters values. * When using the black mark...
  • Page 70 ANYTRON ANYCUT1 User Manual Bitek Technology Select Vision model to update. Select the firmware viersion to update click Update Firmware button. Click OK. (It doesn't have to enter any User name and Password.) © 2016 Bitek Technology. All rights reserved.

  • Page 71: How To Check Whether The Vision Camera Works Or Not

    ANYTRON ANYCUT1 User Manual Bitek Technology firmware updating started. After update is finished, Click Exit button close program. ※ If the machine is turned off during updating vision firmware, the machine can be damaged. 3.2.3.3 How to check whether the vision camera works or not when the vision camera corrects the cutting position, the standard value of the correction is the first job.

  • Page 72: How To Update Software

    ANYTRON ANYCUT1 User Manual Bitek Technology outside of the correction position. At this time, you need to check that the media feeding is straightly and the coordinate of vsion in Beamcut is set correctly. <Vision 이 정상적으로 동작하는 모습> How to Update Software In Anycut, a user needs to update the firmware to upgrade the function or add the new function sometimes.
  • Page 73 ANYTRON ANYCUT1 User Manual Bitek Technology Press Reset and On button one by one. Flash Loader Demo program. After checking the port, click Next. Generally, the port number is detected automatically when the program is run, but if it is...
  • Page 74 ANYTRON ANYCUT1 User Manual Bitek Technology Click Next. Click Next. Press Download from file. © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 74 of 120...

  • Page 75: How To Update For Beamcut

    ANYTRON ANYCUT1 User Manual Bitek Technology Select the firmware to update and click Nexxt. The firmware updating is started. When the firmware updating is completed, click Close button and reboot the machine. Reboot: OFF and ON If you click About in the menu of Beamcut, you can check that the firmware version is updated.
  • Page 76 ANYTRON ANYCUT1 User Manual Bitek Technology Check the Beamcut version used now in Anytron_BeamCut folder. change name Beamcut used now and it will be disable. AnytroneBeamCut -> AnytroneBeamCut_4.8 Change the name of Beamcut to update as below. AnytronBeamCut_4.09 -> AnytroneBeamCut.exe ©...

  • Page 77: Precautions When Operating The Laser

    ANYTRON ANYCUT1 User Manual Bitek Technology you can check the Beamcut version updated in About menu of Beamcut. Precautions when operating the laser 5.1 The Laser Operating Environment The laser has a high output in the lower temperature. laser reaches a plateau with the decreased about 5% after the laser source starts to work until it maintains the temperature as 40 degrees.

  • Page 78: Safety Door

    ANYTRON ANYCUT1 User Manual Bitek Technology <Cooling Fan> 5.2 Safety Door Safety Door designed for user safety to prevent injuries. If the door is opened, the laser is not reached the cutting area since the shutter inside of the machine blocks the laser path.
  • Page 79 ANYTRON ANYCUT1 User Manual Bitek Technology < When the door is closed, the shutter that has been closed is opened > ※ How to Check Shutter Remove marked 6 bolts. © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06...
  • Page 80 ANYTRON ANYCUT1 User Manual Bitek Technology Remove marked 2 bolts. Lift up the Castle Head. © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 80 of 120...

  • Page 81: Emergency Button

    ANYTRON ANYCUT1 User Manual Bitek Technology When you remove the castle head, you can see the shutter like a picture. *You can refer to this manual 5.2 Safety door' *If the shutter does not work, contact your dealer. 5.3 Emergency Button When the emergency occurs, you can stop the machine by Emergency Button during the operation.

  • Page 82: Maintenance

    ANYTRON ANYCUT1 User Manual Bitek Technology Emergency Button is pressed Maintenance 6.1 Consumables / consumable parts life and management Life of the consumables will depend on the user's service environment. It can be decreased by desigen of the cutting line, the type of the media. Thus, you need to manage them periodically so that the equipment is to keep clean.

  • Page 83: Cleaning

    ANYTRON ANYCUT1 User Manual Bitek Technology LASER SOURCE ABOUT 10,000 TIMES MOTOR ABOUT 100 TIMES Stikey Paper UNTIL EXHOUSTION BLADE FOR SLITTER DUST COLLECTOR FILTER ABOUT 2 MONTH 6.2 Cleaning For accidents that occur during maintenance of the equipment, the manufacturer is not responsible for any defect, care must be taken to prevent parts from being damaged during operation.
  • Page 84 ANYTRON ANYCUT1 User Manual Bitek Technology GUIDE RING CLEANING Remove ring guides from machine and clean them with the sticker remover. Clean all bars and rings with the sticker remover. © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06...
  • Page 85 ANYTRON ANYCUT1 User Manual Bitek Technology GUIDE PANEL CLEANING Remove Un/Rewinder guide panel intalled in the machine, and remove the glue attached on the guide panel by using the alcohol or sticker remover. For the guide panel installe inside of Un/Rewinder, Do not remove them from the machine.

  • Page 86: Weekly

    ANYTRON ANYCUT1 User Manual Bitek Technology LASER CUTTING AREA The laser cutting area can be polluted easily due to the dust during the cutting. when working area is polluted, it makes F-theta lens life be decreased, and can disturb the normal operation of the sensor and the vision camera.
  • Page 87 ANYTRON ANYCUT1 User Manual Bitek Technology Clean the surface of the lens by cleaning tissue. 블랙마크 센서(BLACK MARK SENSOR) 클리닝 clean the surface of the lens of the sensor with the paper towel or the soft cloth. Sometimes, it needs to clean everytime depending on the type of the media.

  • Page 88: Monthly

    ANYTRON ANYCUT1 User Manual Bitek Technology ※ The vision camera can be cleaned with the same way for the black mark sensor. 6.2.3 Monthly The parts that needs to be cleaned montly are a duct and filter for dust collector. the pollution about these parts affect the life of other device such as F-theta lens and black mark sensor, vision camera.
  • Page 89 ANYTRON ANYCUT1 User Manual Bitek Technology 집진 필터 (Filter for Dust Collector) ※The dust collector is the peripharal device that user can buy it as an option when they buy Anycut. Because dust collector model used by each user is different, how to replace the filter may also vary accordingly.

  • Page 90: Etc

    ANYTRON ANYCUT1 User Manual Bitek Technology 6.2.4 ETC. CUTTING PAD CLEANING Remove marked 4bolts and remove the top pad. Clean the surface of the seperated pad by using the cleaner and install it again. in some case, it can be replaced with the new one.

  • Page 91: Trouble Shooting

    ANYTRON ANYCUT1 User Manual Bitek Technology Trouble Shooting 7.1 When the power is not on 1) Make sure that the power cable is connected normally Refer to this manual 2.3.1 Cable 2) Make usere that Emergency button is pressed or not Refer to this manual 5.3 Emergency Button...

  • Page 92: When The Media Is Not Feeding Straightly

    ANYTRON ANYCUT1 User Manual Bitek Technology 7.2 When the media is not feeding straightly Even if you install the media normally following the manual, if it is not feeding straightly, it can be corrected by changing the angle of both panel Check both side lever.

  • Page 93: When The Origin For Cutting Is Not Correct (How To Set The Origin)

    ANYTRON ANYCUT1 User Manual Bitek Technology move both side lever until paper transfers straightly. * When two people do this job in each side, this job will be done more easily and quickly. Tighten three bolts again after adjusting media transferring.

  • Page 94: When The Laser Does Not Work

    ANYTRON ANYCUT1 User Manual Bitek Technology When it cuts, each start position of the black mark and cutting line should be the same like this picture by changing the sensor position in Beamcut (refer to next step). If Sensor Pos. value is lower, the...
  • Page 95 ANYTRON ANYCUT1 User Manual Bitek Technology 2) Make sure that the safety door is fully closed or not. refer to this manual 5.2 Safety Door 3) Make sure the green LED is turned on in Ready lamp in the left panel <Panel>...

  • Page 96: When The Laser Power Is Weaker Than Normal

    ANYTRON ANYCUT1 User Manual Bitek Technology < PCB 보드> 6) Make sure the power breaker is Off or not. 7) Make sure that the shutter is opened fully when the door is closed Refer to this manual 5.2 Safety Door 7.5 When the laser power is weaker than normal...
  • Page 97 ANYTRON ANYCUT1 User Manual Bitek Technology 2) How to check the laser power by PowerMeter ※ Contact your dealer about PowerMeter buying or rental Connect the sensor cable to PowerMeter before setting the sensor. After connecting the sensor cable, put the sensor on the cylinder like a picture.
  • Page 98 ANYTRON ANYCUT1 User Manual Bitek Technology Place PowerMeter near machine and turn on the power. Press Measure button. Open "Power_test"file that is offered from the manufacturer in Illustrator. Set the power as below. -Mark Speed 90 -Duty 90~100% © 2016 Bitek Technology. All rights reserved.
  • Page 99 ANYTRON ANYCUT1 User Manual Bitek Technology Select Test Mark in Cutting Mode. * Before cutting, you should check that there are people near the machine. also, wear the safety glasses to keep safety. When the cutting starts, you can chekc the laser power through PowerMeter.
  • Page 100 ANYTRON ANYCUT1 User Manual Bitek Technology Connect the data cable to the board. *The Laser Check Board offers when a user need. Connec the other cable to the other side of the Laser Check Board. Connect the Other side of the data cable to the laser source.
  • Page 101 ANYTRON ANYCUT1 User Manual Bitek Technology Turn on the power of the machine and check the light in three LED lamps on the board. Measure the voltage of the laser source with electronic measuring tool. Measure seperately like a picture.

  • Page 102: When Laser Stays At The Same Position Without Moving

    ANYTRON ANYCUT1 User Manual Bitek Technology 7.6 When laser stays at the same position without moving. Check the scanner cable in the machine / check the pc parts connected the scanner cable Refer to this manual 2.3.1 Cable 7.7 When the laser cuts abnormal shape When cutting long label <...
  • Page 103 ANYTRON ANYCUT1 User Manual Bitek Technology Check Beamcut JoyStick offset : If the X and Y offst values are not 0, it can goes out of the working area. Check Feed Speed : In On the fly mode, if the speed of media feeding is too fast or too slow, the cutting job can be not working.
  • Page 104 ANYTRON ANYCUT1 User Manual Bitek Technology < The cutting line is unstable > How to check ScanHead Remove marked 6 bolts. Remove marked 2bolts. © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 104 of 120...
  • Page 105 ANYTRON ANYCUT1 User Manual Bitek Technology When you lift up the Castle Head, the ScanHead is shown. Disconnect the scanner cable that is connected the machine. © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 105 of 120...
  • Page 106 ANYTRON ANYCUT1 User Manual Bitek Technology Connect the scanner cable to the ScanHead directly and have a test. *When you have a test, if the machine is working normally, it needs to replace the scanner cable inside of the machine.
  • Page 107 ANYTRON ANYCUT1 User Manual Bitek Technology Materials needed : 270X270mm thick thermal paper, Double- sided tape, Knife, Ruler If you need to use the thin thermal paper, use that by sticking it to the thick A3 paper. (preventing warping paper) Put the thermal paper on the cutting area like a picture.
  • Page 108 ANYTRON ANYCUT1 User Manual Bitek Technology Run Square software for Scale calibration. ※ Path of Square S/W Computer\Cdrive\Anytrone_Be amCut\Square-6.0 Click Option-Setup Select PSC14x © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 108 of 120...
  • Page 109 ANYTRON ANYCUT1 User Manual Bitek Technology Select 16bit Select the laser icon. Click [find]. © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 109 of 120...
  • Page 110 ANYTRON ANYCUT1 User Manual Bitek Technology Select file (default(257- 16bit).pcf). Set values like a picture. After setting is done, clic [Mark] laser marking will started. © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 110 of 120...
  • Page 111 ANYTRON ANYCUT1 User Manual Bitek Technology Mark X and Y axis on the top right side like a picture. Marked X and Y axxis. Mark the center point (17th point). © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06...
  • Page 112 ANYTRON ANYCUT1 User Manual Bitek Technology In a centered position on the points, X, Y axis measures the correct size. Scan the marked thermal paper by A3 scanner. And rotate the scanned image so that the marked axis is bottom of the left.
  • Page 113 ANYTRON ANYCUT1 User Manual Bitek Technology Open saved tiff file in Square program. Click marked icon. Set the value as 230. © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 113 of 120...
  • Page 114 ANYTRON ANYCUT1 User Manual Bitek Technology Remove the dust by using an eraser icon, except the marked area with the laser. Except the dots that is marked in the correct area, all letter, lines, dots should be removed. If there are unmarked dots, you can make a dot in the area where it should be.
  • Page 115 ANYTRON ANYCUT1 User Manual Bitek Technology Click the telescope icon. Select some dot you want and drag it. Enter X and Y value that were measured in step 16 and click (Width=X, Height=Y) © 2016 Bitek Technology. All rights reserved.
  • Page 116 ANYTRON ANYCUT1 User Manual Bitek Technology When you do step 27, the program measure the offset automatically. If it finds all dots correctly, the shape will be like this picture. If you see abnormal pattern that is different with this picture, try again step from 19 to 28.
  • Page 117 ANYTRON ANYCUT1 User Manual Bitek Technology Beamcut correction(.pcf) file you've made in step 30. Setting > Control Card > PCF File [Find] *You should try step 31 in Master and Slave Tap, both of them. The default angle is 180.

  • Page 118: Beamcut Error Message

    ANYTRON ANYCUT1 User Manual Bitek Technology Mark various size squares and circles with the laser. Compare the size between marked size actually and diesigned size in Illutrator. 7.8 BeamCut Error Message Checking list Check results Step Contents Reference Fault End Marking Data marking Fail ANYCUT UserManual 3.2...

  • Page 119: Pre-Check List

    ANYTRON ANYCUT1 User Manual Bitek Technology PRE-CHECK LIST If you cannot solve the problem with this manual, please ask the dealer to get Pre-Check List seperately. Manufacturer : BITEK TECHNOLOGY E-mail : info@anytron.net , Tel : 1566-5321 © 2016 Bitek Technology. All rights reserved.
  • Page 120 ANYTRON ANYCUT1 User Manual Bitek Technology End of Document © 2016 Bitek Technology. All rights reserved. Rev 1.0.0 – 2016.03.06 User Document 120 of 120...

Table of Contents