After inputting a new key or using the default key for decryption, the demo software will send an 8-
byte decrypted data for Authentication. If the Authentication passes, the user can load a new device
key for encryption.
Load Device Key
The load device key loads a 16-byte key to the device.
4.2. Other Mode Fixed Key Encryption
Follow the Authentication steps in 3.1 to change encryption setting in Other Mode.
Select Encryption Enable Encryption to enable encryption on the reader.
Go to Encryption Disable Encryption to disable encryption.
4.2.1. Data Decryption
1. Swipe a test card on the reader.
SecureHead™ Demo Program
Page | 12
Need help?
Do you have a question about the SecureHead and is the answer not in the manual?