Adventuridge 20PK User Manual

Adventuridge 20PK User Manual

Tent pegs

Advertisement

HARD GROUND
TENT PEGS 20PK
Ideal for hard ground
Tools required (not included):
Mallet
USER GUIDE
1. Loop guy rope through the hole
in tent peg as shown above and
secure.
4. Adjust guy ropes and tension to
the desired strength.
2. Extend guy rope and tent peg out
as much as required.
5. Repeat the process for any other
tent pegs used.
3. Insert tent peg into ground at an
angle. Use a mallet (not included) to
push the tent peg into the ground.
After use, pull out tent pegs using
the tent peg puller supplied. Hook
tent peg puller under plastic stopper.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 20PK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Adventuridge 20PK

  • Page 1 USER GUIDE HARD GROUND TENT PEGS 20PK Ideal for hard ground Tools required (not included): Mallet 1. Loop guy rope through the hole 2. Extend guy rope and tent peg out 3. Insert tent peg into ground at an in tent peg as shown above and as much as required.
  • Page 2 USER GUIDE PILE DRIVER TENT PEGS 15PK Ideal for medium to hard ground Tools required (not included): Drill or spanner 1. Tie a loop in the guy rope and slip the tent peg into this OR loop the guy 2. At the desired position, push the rope around the tent peg.

This manual is also suitable for:

15pk

Table of Contents

Save PDF