平台/软件操作说明 Dear customer, 1 / 2 Operating Instruction Thank you for using our product. For better use, please carefully read this instruction. If you have any The software carried by the product divides into 2 versions: WO (WO platform, provides the secondary issues not mentioned here, please contact the provider.
3 / 4 Illumination intensity Position Device shall be installed in places avoiding backlight, side-light and strong light. Illumination intensity in actual scenarios The recognized face, of which, the illumination intensity (“intensity” in short) shall not be lower This place, 3m away from the window, or does not Device Person Light...
Page 4
Steps 5 / 6 Paste hole papers, and keep the horizontal line parallel with the ground and the red line 1.25m Fix the device, manually adjust device angle to reach the optimal recognition angle. distance to the ground. Drill 4 screw holes on the wall according to the reminder of hole paper, drill 1 outlet hole according to wiring need.
7 / 8 Wiring connection Wiring for magnetic door Wiring for automatic door Installation notes 1. When arrange the wires, if the 12V power supply cable of the host does not adopt the “Special power strip” and is in long distance, resulting in large resistance, then abnormal phenomena may occur easily such as Magnetic lock Auto-door controller Sensor (inside)
9 / 10 Features Warranty description Dear customer, Thank you for purchasing and using this product. To better guarantee your satisfaction, please carefullyread • Try to restart and reset • Characteristics this warranty clauses after purchase. When the device stops in some interface for a Night infrared and RGB dual-filling light;...
Need help?
Do you have a question about the OS-M385C2-V-R23WF-TEMPF and is the answer not in the manual?
Questions and answers