PI Manufacturing HDMI-401-MS Operation Manual

Operation Manual
HDMI-401-MS
4x1 HDMI Multiviewer /
Switch
OUTPUT
DC 12V
HDMI
Introduction
The 4x1 HDMI multiviewer / switch provides a solution
to display up to 4 HDMI sources simultaneously on one
HDMI display at resolutions up to 1080p / 60Hz. The
device features full screen, dual screen, and quad
screen display modes, which can be switched through
a remote control or by the button located on the device
for easy con guration. Constructed with metal for
durability, the device is also wall mountable and comes
with the screws and hardware for easy mounting.
Features
• Simultaneously display four HDMI sources on a single
display
• 4 x HDMI inputs and 1 x HDMI output
• Supports resolutions up to 1080p / 60Hz
• Supports full screen, dual screen, and quad screen
display modes
• Modes can be switched through remote control or by
the button in front of the device
• Wall mountable design
• Metal casing for durability
Physical Connection
Front Panel
DC 12V
1
AUDIO MODE IR
1. 12V DC Input
2. HDMI Signal Output
3. Audio Button
4. Mode Button
5. IR Signal Input
Rear Panel
6. HDMI Signal Input
OUTPUT
AUDIO MODE IR
HDMI
4 5
2 3
INPUT
HDMI 1 HDMI 2 HDMI 3 HDMI 4
6
Remote Control
HDMI 4x1 Quad Multi-Viewer Switcher
1
2 3 4
1
1 2 3 4
2 3 4
1 2
3 4
RES
Connection Diagram
HDMI Sources (Supports up to 4)
HDMI Inputs
HDMI Switch
HDMI Output
15 13 11 9 7 5 3 1
+ RS485 ALARM - G 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
7 5 3 1 VGA SENSOR
8 6 4 2
16 14 12 10 8 6 4 2 AUDIO AUDIO
VIDEO INPUT AUDIO INPUT(9-16) INPUT OUTPUT HDMI LAN
Connection Instructions
1. Connect HDMI sources to the HDMI inputs on the
4x1 HDMI Multiviewer / Switch.
2. Connect a HDMI cable from the HDMI output on
the 4x1 HDMI Multiviewer / Switch to a HDMI
display.
3. The display layout can be controlled via the
remote control or push button on the switch itself.
HDMI Display
A