Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for BABY PATENT Aquascale
- Page 1 How to operate your AquaScale™ Insert the batteries: (LR3 1.5v AAA) x2...
- Page 2 3. use the dedicated stand supporter. 4. Press TARE 3 and wait two seconds for the scales to reset. 5. Lay the baby in the AquaScale™ and press NET to get the baby’s net weight. It will calculate movements and HOLD the reading.
- Page 3 • Always clean the bath with a non-abrasive detergent and dry with a damp cloth. • Remove the battery if the AquaScale™ is not going to be used for a long period. • Do not use the bath if anything is broken or missing.
- Page 4 TEMPERATURE CONTROL: 1. Make sure the waters temperature is approximately 37°C before laying the baby in the bath. 2. Water’s temperature appears on the LCD and automatically updates the reading. 3. To convert Fahrenheit to Celsius – one short press on MODE. ERGONOMIC REMOVABLE POST: 1.
Need help?
Do you have a question about the Aquascale and is the answer not in the manual?
Questions and answers
On the screen is "Lo 88". What does this mean?
"Lo 88" on the BABY PATENT Aquascale screen likely indicates that the water temperature is low, specifically 88°F. The "Lo" warning suggests the water may be too cold for a baby.
This answer is automatically generated