Installation; Ac Power Considerations - ILX Lightwave LDX-3500 Series User Manual

2
C H A P T E R
I O
NSTALLATION AND PERATION
This chapter describes how to install, adjust, and operate the LDX-3500 Series
Precision Current Sources. It is divided into sections covering installation,
familiarization and adjustment, and normal operating procedures.
Later in this chapter, there is an overview of the LDX-3500 Series' front panel
features, and it presents a guide to quickly familiarize the user with the front panel
operations.

Installation

AC Power Considerations

The LDX-3500 Series Controllers can be configured to operate at nominal line
voltages 100, 120, 220-240 VAC. Normally, this is done at the factory and need
not be changed before operating the instrument. However, check to be sure that
the voltage marked on the back panel of the instrument matches the power-line
voltage in your area. Refer to Chapter 3 Maintenance if it is necessary to
reconfigure the input voltage range.
To avoid electrical shock hazard, connect the instrument to properly earth-grounded,
3-prong receptacles only. Failure to observe this precaution can result in severe injury
or death.
11
LDX-3500 Series
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com