Page 1
Lifetime Warranty Lucidity Lights, Inc. provides this limited warranty to the original purchaser. For more information about your warranty, visit bebrilli.com/pages/warranty. 24” x 32” Vertical Orientation For additional patent, FCC and other information, visit bebrilli.com. BRI-L/IF/MIR24X32/56/D00...
Not intended to diagnose, treat, cure or prevent any disease or medical condition. If installing this Vanity Mirror into a new space, professional assistance from an electrician is highly recommended. Contact Brilli Concierge at concierge@bebrilli.com for assistance.
FCC Statement This device complies with Part 15 of the FCC Rules and with RSSs of in a residential installation. This equipment generates, uses and can radiate Industry Canada. radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
C. Turn the screws with the screwdriver into the E-Z anchors. Note: The Brilli Mirror is 24” x 32” and can only be hung vertically. Continue tightening until flush. C. Hold the bracket horizontally where the mirror will be installed and use the level to ensure the bracket is straight.
Page 6
B. Hang the mirror on the bracket surface of the bottom left and bottom fixed to the wall. right corners of the back of the Brilli Mirror. C. Use the level to make sure the Brilli Mirror is straight, then 4.
Our Features • 760 Lux for optimal brightness – up to 4x more than the leading brands • 5690 Kelvin at CRI 95+ for whiter whites and brighter, more vivid colors • One-Touch Sensor Control for on/off, anti-fog and dimming •...
Dimming: • Once your Brilli Mirror is on, hold the power button until the mirror dims to the setting you prefer. • To make your mirror brighter, press and hold the power button again to increase the light output.