Advertisement
1-3. Installation Procedures
7. Route the coaxial cables of the BKMW-104's SDI/HD
SDI panel assembly through the hole of the VTR
chassis.
8. Attach the SDI/HD SDI panel assembly.
For the recorder
(1) Attach the coaxial connector converter to the SDI/
HD SDI panel assembly using the two screws of
the supplied accessories.
n
Be sure to position the coaxial connector converter
as shown in the figure.
(2) Attach the SDI/HD SDI panel assembly to the
VTR using the four screws of the supplied acces-
sories.
Red
Upper side
Yellow
Lower side
Coaxial connector
converter
BVTT3 x 6
(Supplied
accessory)
SDI/HD SDI panel assembly
1-4 (E)
Coaxial cables
Hole
For the player
(1) Affix the blank panel of the supplied accessories
onto the SDI/HD SDI panel assembly.
(2) Attach the SDI/HD SDI panel assembly to the
VTR using the four screws of the supplied acces-
sories.
Blank panel (Supplied accessory)
SDI/HD SDI panel assembly
Blank panel
BVTT3 x 6
(Supplied
accessory)
SDI/HD SDI panel assembly
BVTT3 x 6
(Supplied accessory)
9. Connect the coaxial cables (A), (B) and (C) to the
coaxial connectors of the HIF-1B assembly, and fix
them with the wire holder as shown in the figure.
< Rear side >
HIF-1B assembly
Wire holder
Wire holder
Coaxial cables
Coaxial cables
Hole
Coaxial cables
C
A
B
Coaxial connectors (NC)
HIF-1B
assembly
HIF-1B
assembly
BKMW-104
Advertisement
