Table of Contents
Advertisement
Quick Links
PROOFERS
BAKERLUX SHOP.Pro™
XAKPT-08HS-C
XAKPT-08FS-C
INSTALLATION, USE AND MAINTENANCE
MANUAL
Translation of original instructions
Read and understand this manual completely before attempting to install,
operate, or service this equipment. This manual is intended for use only by
qualified installers of electric appliances.
RETAIN THIS MANUAL FOR FUTURE
REFERENCE
Advertisement
Table of Contents
Summary of Contents for Cadco BAKERLUX SHOP.Pro XAKPT-08HS-C
- Page 1 PROOFERS BAKERLUX SHOP.Pro™ XAKPT-08HS-C XAKPT-08FS-C INSTALLATION, USE AND MAINTENANCE MANUAL Translation of original instructions Read and understand this manual completely before attempting to install, operate, or service this equipment. This manual is intended for use only by qualified installers of electric appliances. RETAIN THIS MANUAL FOR FUTURE REFERENCE...
-
Page 2: Important For Your Safety
IMPORTANT FOR YOUR SAFETY This manual is intended for use only by qualified installers of electric appliances to install and set up the CADCO proofer models listed on the cover of this document. It also contains operational instructions for the users of the appliance. -
Page 3: Table Of Contents
SAFETY REGULATIONS IMPORTANT FOR YOUR SAFETY ........................ 2 SAFETY PRECAUTIONS ..........................2 SAFETY REGULATIONS ..........................4 PICTOGRAMS ............................8 INTRODUCTION INTRODUCTION ............................9 INSTALLATION PRE-INSTALLATION ..........................11 HANDLING ............................... 12 UNPACKING THE APPLIANCE ........................13 CHECKING PACK CONTENTS ........................14 GETTING STARTED ........................... -
Page 4: Safety Regulations
- All installation, assembly and non-routine maintenance operations must be performed exclusively by qualified technicians that are authorized by CADCO, in compliance with the regulations in force in the user country, with respect to the regulations on systems and work safety. - Page 5 - If the equipment is installed on mobile bases or stacked in columns, be sure to use only CADCO components and respect the instructions on their packaging. - Given its potential danger, the packaging material must be kept out of reach of children and animals, and correctly disposed of in compliance with local regulations.
- Page 6 - If the appliance does not function or if there are any functional or structural alterations, disconnect the electricity and water supplies and contact a CADCO authorized customer assistance service. Do not attempt to independently repair the appliance. Request CADCO original spare parts for any repairs necessary.
- Page 7 (i.e. gasoline, petrol, bottles of alcohol, etc...). Always keep the proofer cavity clean by cleaning after each use: grease or food residues could catch fire if not removed! For further details go to the "Warranty" section of the www.cadco-ltd.com website...
-
Page 8: Pictograms
RISK OF ELECTRICAL SHOCK - Do not open the compartments marked with these symbols: access is reserved to qualified personnel authorized by CADCO. - Failure to observe these regulations may cause damage and (fatal) injuries, and also invalidates the warranty*. -
Page 9: Introduction
BAKERLUXSHOP.Pro™Proofers Introduction Congratulations and thank you for choosing to purchase a BAKERLUX SHOP.Pro™ proofer. This appliance can be used exclusively: - by qualified personnel that attend scheduled training courses; - in combination with UNOX electrical ovens from the BAKERLUX SHOP.Pro “Table A”below);... - Page 10 The model number and serial number are located on the serial plate similar to the one shown. Dealer: (The company where the Cadco Installation date: appliance was purchased) XAKPT-08FS-C Pe: 6,3 kW 220-240V 1N˜220-240V 3˜/380-415V 3N˜50/60 Hz 150-600 kPa IP X3...
-
Page 11: Pre-Installation
BAKERLUXSHOP.Pro™Proofers Pre-installation INSTALLATION CODES AND STANDARDS Installations within the United States, must follow: - 1.State and local codes. - 2.National Electrical Code (ANSI/ NFPA No.70, latest edition) available from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269. - 3.Vapor Removal from Cooking Equipment, (NFPA-96, latest edition) available from NFPA. -
Page 12: Handling
HANDLING The appliance is very heavy and may require the use of moving equipment. WARNING Injury risk! Do not lift or move the appliance without adequate help. Heavy lifting, over 51 pounds (23 kg), may result in personal injury. Make sure the appliance is not in danger of tipping over during transportation. -
Page 13: Unpacking The Appliance
UNPACKING OF THE APPLIANCE Check the package for any visible damage. If damage is found, contact CADCO immediately and DO NOT install the appliance. Before transporting the appliance to its installation point, make sure that: - it easily passes through doorways;... -
Page 14: Checking Pack Contents
WARNING must be performed by certified technicians in compliance with local, state, and federal regulations. CHECKING PACKAGE CONTENTS Before installing the appliance, check that the following components are in the package and undamaged. Contact CADCO if any pieces are missing. -
Page 15: Getting Started
BAKERLUX SHOP.Pro™ Proofers Installation WARNING Before installing the appliance, carefully read the section “Safety regulations” on page 4. GETTING STARTED REMOVING THE PROTECTIVE FILM Slowly remove the protective films from the appliance. Clean any glue residue with appropriate solvents without using tools, abrasive detergents or acids that could spoil the surfaces. -
Page 16: Positioning
POSITIONING CHARACTERISTICS OF THE INSTALLATION AREA Install the appliance in areas: - dedicated and conforming to the cooking of industrial foods; - having adequate air ventilation; - that comply with the laws in your country; - protected from the weather; - with temperatures between 41 °F to 104 °F maximum (5 °C to 35 °C);... - Page 17 CONNECTION The installation areas must be equipped with electrical and plumbing systems that comply with the regulations on system and work safety of the country of use. The figure gives indicative connection measurements: electrical connection plumbing connection 10 cm...
- Page 18 INSTALLATION MEASUREMENTS Position the appliance respecting the indicated distances in the diagram and so that the back of the oven is easily accessible for appliance connections and maintenance. Do not install the appliance near flammable or heat sensitive materials, walls or furniture.
- Page 19 BAKERLUX SHOP.Pro™ line, and fixed to them following the steps shown in the figure. Should you need to move the cooking column, use the Cadco casters kit only. Contact Cadco for information. Follow the instructions contained in the package to assemble the mobile kit. OVEN OVEN STACKING KIT...
-
Page 21: Electrical Connection
Made by: UNOX S.p.A. Via Majorana 22, 35010 Cadoneghe - Padova (ITALY) or even electrocution. Incorrect connection of the electrical wires may damage the appliance. grey or white = neutral wire black, red, blue = phase L1, L2, L3 *For more information, go to www.cadco-ltd.com and visit the “Warranty” section... - Page 22 The cable must be replaced by mains. CADCO or by its technical - Check for any electrical dispersion assistance service, and in all cases by a person between the phases and the...
-
Page 23: Plumbing Connections
PLUMBING CONNECTION Use the set of new connections supplied with the appliance for the connection to the water mains. Connections that have already been used must not be used again. Before connecting the water pipe to the appliance, flush it out with water in order to eliminate any residue which may have accumulated inside. - Page 24 INCOMING WATER The bottom of the appliance contains If water pressure at the inlet two meters of pipe with a tee for is less than the minimum connecting to the oven water supply specified value (22 psi - 1.50 (including mechanical filter and fitting bar) a pump (minimum water flow (3/4") with non- return valve).
- Page 25 The maximum chloride content, Cl-, is not a fixed value; it depends on calculated Non Hardness Measurement (NHM) NHM = EC - (TH** x 30) EC = electrical conductivity [μS/cm] TH = total hardness** [° dH - German degrees] Use generic ice machine or espresso machine filter, or contact Cadco.
- Page 26 Should the water values for moisture generation differ from those shown, use a filter. cold water supply, thermally controlled by a temperature sensor (IN)
-
Page 27: Connecting Stacked Appliances
MAXI.Link CONNECTING STACKED APPLIANCES ( All ovens of the BAKERLUX SHOP.Pro™ line are designed to be connected to accessories (proofer, hood, etc.). The accessories connect to the oven using connectors on the back of the oven, which automatically connect. Follow the instructions contained in the accessory and appliance packaging for information on how to fully... -
Page 28: General Appliance Operating Instructions
BAKERLUXSHOP.Pro™Proofers WARNING Before use the appliance, carefully read the section “Safety regulations” on page 4. Before using the appliance make sure that you have a system conformity and use permit certificate that is issued by a UNOX authorized installer. GENERAL APPLIANCE OPERATING INSTRUCTIONS When using the appliance for the first time be sure to thoroughly clean the inside of the prover cavity and the accessories (see chapter “Maintenance”... -
Page 29: Maintenance
Wait for the surfaces to cool off. Use a soft cleaning cloth dampened with a little soap and water only. Rinse and dry completely. Alternatively, only use detergents recommended by CADCO; other products may cause damage, thereby invalidating the warranty. Read the usage instructions provided by... - Page 30 When replacing the part make sure that it fits ```close against the back wall of the oven chamber. *For further details go to the "Warranty" section of the www.cadco-ltd.com website...
-
Page 31: Inactivity
INACTIVITY During periods of inactivity, take the following precautions: - disconnect the appliance from the power and water supplies; - rub a soft cloth lightly doused with mineral oil on all stainless steel surfaces; Before reusing the appliance: - clean the appliance and its accessories thoroughly (see chapter “Maintenance” on page 31);... -
Page 32: After-Sales Assistance
AFTER-SALES ASSISTANCE In case of any malfunctions, disconnect the appliance from its power and water supply. Consult the solutions proposed in the table. If the solution is not listed in the table, contact CADCO Customer Service. Provide the following XAKPT-08FS-C information: Pe: 6,3 kW 220-240V 1N˜220-240V 3˜/380-415V 3N˜50/60 Hz 150-600 kPa IP X3... -
Page 33: Warranty
WARRANTY Cadco, Ltd. warrants all products (in the United States and Canada) to be free from defects in material and workmanship for a period of one year from date of purchase, unless otherwise noted below.*** Warranty does not apply in cases of misuse, abuse or damage from external service or repair attempts by unauthorized personnel.