Advertisement
Quick Links
Ultimate Carport 3.8m
BCCPSW3820+G / BCCPSW3825+G
Assembly Instructions
IMPORTANT
Please read these instructions thoroughly before starting assembly.
Check all parts are present before assembly, call 020 3011 2040 for replacement parts.
These instructions should be kept in a safe place for future use.
Advertisement
Summary of Contents for Norfolk Greenhouses BCCPSW3820+G
- Page 1 Ultimate Carport 3.8m BCCPSW3820+G / BCCPSW3825+G Assembly Instructions IMPORTANT Please read these instructions thoroughly before starting assembly. Check all parts are present before assembly, call 020 3011 2040 for replacement parts. These instructions should be kept in a safe place for future use.
- Page 2 Canopy Introduction Thank you for your purchase of our Carport, we hope you enjoy. Please read through these instructions and familiarise yourself with the construction process before you begin. We operate a programme of continuous product improvement and we reserve the right to change the specification without prior notice, the latest model is supplied.
- Page 3 • Ladder • Tape Measure Maintenance • It is advised that periodically or after storms or gales you check all nuts, bolts and screws, and tighten where necessary. • Clean using warm soapy water and a non-abrasive cloth. © Norfolk Greenhouses...
- Page 4 Parts List Canopy Framework RL16 RL17 RL17A PST1 (2.0m model) RL19 PST3 (2.5m model) RL20 GUT130W GUT1575W GUT2000W DP85W XL71 DP1580W / DP2080W...
- Page 5 Contact Support on 020 3011 2040 Roof Sheets (1140mm x 1830mm) (1140mm x 940mm) © Norfolk Greenhouses...
- Page 6 Parts List Canopy Hardware WRUS1 WROS1 WRES1 WRKS1 WKFB2 WKFB3 WOGC3 HBDT NYLOC STUD30...
- Page 7 Contact Support on 020 3011 2040 Hardware CBM6X80 ST4X34 ST8X5 SC6X32 MM7X60 1x 8.5mm Drill Bit © Norfolk Greenhouses...
- Page 8 Frame Assembly Canopy Step 1 - Fix HBD brackets to both RL17A, as per configuration below Step 2 - Fix both RL17A beams to wall Offer both RL17A to the wall and measure from ground to underside of beam. Align horizontally using a spirit level and mark the holes.
- Page 9 Contact Support on 020 3011 2040 Step 3 - Add CP6 to the LEG then fix BM1 between the Leg and RL17A Step 4 - Repeat previous step for second Leg, then fix RL17 between both uprights © Norfolk Greenhouses...
- Page 10 Frame Assembly Canopy Step 5 - Fix HBD and HBDT brackets to BM1 beams, as configured below Step 6 - Attach 2x RL16...
- Page 11 Contact Support on 020 3011 2040 Step 7 - Assemble LEG and BM1 as shown, fix to RL17A Step 8 - Fix RL20 between both uprights For 3.8m Carport use RL20. For 3.8m Carport with Extension Kit, use RL17. © Norfolk Greenhouses...
- Page 12 Frame Assembly Canopy Step9 - Fix HBD brackets to BM1 as shown Step 10 - Attach 2x RL19...
- Page 13 Step 11 - Fix XL71 to underside of each BM1. Push fit HBP to exposed ends of the front beam. EXTENSION KIT If building a Carport with Extension, from this point on refer to "Carport Extension" manual supplied with extension kit. © Norfolk Greenhouses...
- Page 14 Roof Assembly Canopy Step 12 - Fix SR6 roof sheet to the front left corner of roof frame. Place first sheet of SR6 in the front left corner of the roof, position so that there is a 50mm overhang from front beam (see image right).
- Page 15 8x SC6X32 every 3rd corrugation as shown. Step 14 - Fix exposed edge of last SR6 sheet to BM1 Fix using 4x SC6X32 as shown leaving space at the top of sheet for SR7 to overlap. © Norfolk Greenhouses...
- Page 16 Roof Assembly Canopy Step 15 - Position SR7 on top of first SR6, tight against the wall and fix. Fix using 9x SC6X32 on exposed edge and every 3rd corrugation as shown. Step 16 - Fix remaining 3x SR7 sheets Fix each sheet using 8x SC6X32 every 3rd corrugation as shown.
- Page 17 Contact Support on 020 3011 2040 Step 17 - Fix exposed edge of last SR7 sheet to BM1 Fix using 3x SC6X32 as shown . © Norfolk Greenhouses...
- Page 18 Gutter Assembly Canopy Step 18 - Assemble gutter and fix to front beam of carport...
- Page 19 Step 19 - Assemble and fix downpipe to LEG Step 20 - Anchor feet to the ground Use spirit level to align legs in the upright position. Fix to the ground through holes in steel foot using appropriate fixings (not supplied). © Norfolk Greenhouses...
- Page 20 Canopy Norfolk Greenhouses 1 Vincent Avenue Crownhill Industry Milton Keynes MK8 0AB Tel: 020 3011 2040 E-mail: info@norfolk-greenhouses.co.uk...