Safety Instructions - tams elektronik FI-1 Manual

English
Intended use
The function inverter FI-1 is designed to be operated according to the
instructions in this manual in model building, especially with model
railways. Any other use is inappropriate and invalidates any guarantees.
The function inverter FI-1 should not be mounted by children under the
age of 14.
Reading, understanding and following the instructions in this manual
are mandatory for the user.
Checking the package contents
Please make sure that your package contains:

one function inverter,

one manual.
Required materials
For assembling the kit you need:

an electronic soldering iron (max. 30 Watt) or a regulated soldering
iron with a fine tip and a soldering iron stand,

a tip-cleaning sponge,

a heat-resistant mat,

a small side cutter and wire stripper,

as necessary a pair of tweezers and long nose pliers,

electronic tin solder (0.5 mm diameter),

wire.

2. Safety instructions

Mechanical hazards
Cut wires can have sharp ends and can cause serious injuries. Watch
out for sharp edges when you pick up the PCB.
Visibly damaged parts can cause unpredictable danger. Do not use
damaged parts: recycle and replace them with new ones.
Page 16
FI-1