Advertisement
Model: PRO – BLEND MAXX
COMMERCIAL BLENDER
Exclusively distributed by:
COLENT MARKETING PHILIPPINES, INC.
Berton's Place, #46 Sta. Rosa Street, Quezon City, Philippines 1115
Website: www.colentco.com
Landline: (632)442-3866 ; 412-6155 ; 413-8819 ; 442-3856 ; 448-7674
Mobile:
0923-5345681; 0917-3079188 ; 0920-9746874
Email: sales_mktg@colentco.com, iwata@colentco.com, iwata2@colentco.com
or iwata3@colentco.com
Advertisement
Table of Contents
Summary of Contents for Iwata PRO – BLEND MAXX
- Page 1 Exclusively distributed by: COLENT MARKETING PHILIPPINES, INC. Berton’s Place, #46 Sta. Rosa Street, Quezon City, Philippines 1115 Website: www.colentco.com Landline: (632)442-3866 ; 412-6155 ; 413-8819 ; 442-3856 ; 448-7674 Mobile: 0923-5345681; 0917-3079188 ; 0920-9746874 Email: sales_mktg@colentco.com, iwata@colentco.com, iwata2@colentco.com or iwata3@colentco.com...
- Page 2 READ THIS MANUAL THOROUGHLY PRIOR TO INITIAL USE AND SAVE FOR FUTURE REFERENCE SAFETY PRECAUTIONS Check that the local voltage supply matches the rated voltage of product. 1. Do not allow the power cord and plug to come in contact with water or other liquids to avoid electric shock or fire.
- Page 3 attachments that are not recommended by the manufacturer can result in injury or damages and will void warranty on the unit. 11. Do not immerse the pitcher in water or other liquid when cleaning. 12. Make sure the pitcher is properly mounted to de-activate the safety switch. PRODUCT SPECIFICATIONS...
- Page 4 SPECIFICATIONS Item No.: Rated Voltage Frequency Power Capacity Rated speed PRO-BLEND MAXX 220V-240V 60HZ 2000W 2.0L 28000RPM CONTROL PANNEL 1. Prior to initial use, check that all parts are complete and that the base is in good condition then pour 1000ml of water into the pitcher and let it run at mid speed for a minute to clean it.
- Page 5 OPERATING THE UNIT: 1. When power is on, make sure the speed control knob is at “MIN” position and function knob is at “0” position, then adjust the speed control knob from low to high in clockwise direction. The machine will stop when set at “MIN” position.
Need help?
Do you have a question about the PRO – BLEND MAXX and is the answer not in the manual?
Questions and answers