Using The Battery - LG CineBeam PH150G Owner's Manual

Using the battery

Battery using time information
Charging
About 3 hours (When in stand by and charging)
Up to 2.5 hours
Usage
(Available battery using time up to 2.5 hours when
Hours
Energy Saving mode set to Max.)
• If you do not intend to use the projector for a long time, leave the
battery charged at 40 % to 50 %.
•
The battery is automatically recharged when the projector is connected
to a power supply.
• Charge the battery fully when you first use the projector.
• The battery standard usage time given in the manual is based on
measurements taken by LG; the actual time may vary depending upon
usage.
• Battery usage time may vary depending on broadcast type, operating
temperature, period of use, and user preferences.
• As the battery is consumable, its lifetime gradually decreases. When
the battery's life is reduced by half, replace it with a new battery from
an LG Electronics Customer Support Center.
• Do not charge the battery using any equipment other than that
supplied with the product. This may damage the battery or cause a fire.
• Always use a battery that is approved and certified by LG Electronics,
Inc. Failure to do so may result in an explosion or fire.
• If the battery is leaking or giving off an odor, discontinue its use
immediately and contact LG Electronics Customer Support Center.
• The battery contains lithium-ion, so please handle with care. Failure to
do so may result in an explosion or fire.
12