NORDGAS EASYREMOTE Instruction Manual
  1. Manuals
  2. Brands
  3. NORDGAS Manuals
  4. Remote Control
  5. EASYREMOTE
  6. Instruction manual

NORDGAS EASYREMOTE Instruction Manual

Remote control device
Hide thumbs
Table of Contents

Advertisement

Quick Links

INSTRUCTION
MANUAL
REMOTE CONTROL DEVICE
EASYREMOTE

Advertisement

Table of Contents
loading

Summary of Contents for NORDGAS EASYREMOTE

  • Page 1 INSTRUCTION MANUAL REMOTE CONTROL DEVICE EASYREMOTE...
  • Page 2 Technical features Guide to LCD symbols Guide to keys...
  • Page 3 Technical features Supply by communication bus Number of temperature levels 2 (DAY / NIGHT) Temperature setting range DAY 5 ÷ 30 °C Temperature setting range NIGHT 5 ÷ 30 °C Temperature setting range MANUAL 5 ÷ 30 °C Differential operation temperature OFF 0.0 ÷...
  • Page 4 Dear customer, Our compliments for buying the remote control device EASYREMOTE, a product of latest technologies which will give you superior comfort. In order to get top performance and to learn how to best use features and functions of this remote control device, care- fully read this manual and keep it always readily accessible in case you need to refer to it.
  • Page 5 Keys Select operation status Set time and temperature Weekly program Change displayed value (turn) Select automatic / manual (press) Alarm reset Select temperature level (day/night) Temperature display...
  • Page 6 LCD symbols ICON STEADY BLINKING ICON STEADY BLINKING Set time and day of Current temperature Fault code the week Time/temperature Set day temperature Current day of the week Change day of the week Set night temperature Domestic hot water Domestic hot water Heating temperature Set heating temperature enabled...

  • Page 7: Table Of Contents

    Contents 1 - How to use this instruction booklet ................3 2 - General instructions ....................4 3 - Main features ......................5 4 - Installation ......................6 5 - Configurating operating parameters ..............10 6 - Disabling thermo-regulation ................13 7 - Selecting operating mode ................... 14 8 - Setting up clock and temperature ...............
  • Page 8 11 - Weekly storage tank program ................31 11.1 - Display storage tank program ..............32 11.2 - Change storage tank program ............... 33 12 - Temporary change room temperature set point ..........34 13 - Fault signalling ....................35 13.1 - Restorable faults ..................

  • Page 9: How To Use This Instruction Booklet

    1 - How to use this instruction booklet This booklet is divided into two sec- functioning of the EASYREMOTE tions, each of which having its own remote control device. addressee: • Installer section , this gives instruc- Some hints tions regarding the accurate installation •...

  • Page 10: General Instructions

    2 - General instructions • Carefully read this manual because • If the device is installed to control a low it will give you important instructions temperature zone, this zone must be regarding the safety of use, installation equipped with a low temperature safety and maintenance.

  • Page 11: Main Features

    They give it the necessary supply ity to set the boiler from remote. to operate and constitute also the com- The programming of the EASYREMOTE munication between the two devices. remote control device is extremely easy - After installing it is immediately ready to a large LCD-display makes it possible to run with its memorized standard program.

  • Page 12: Installation

    4 - Installation The EASYREMOTE remote control Install the EASYREMOTE remote con- device must be installed only by expert trol device at approx. 1.5 m over floor in personnel. a place suitable for correct sensing of the To correctly install the device and in com- room temperature.
  • Page 13 Use the proper holes to install the template. EASYREMOTE remote control device directly onto the wall or onto a housing. The necessary screws are supplied together with the device. Pay attention to the sign “...
  • Page 14 4. Connect electricity to the terminal 5. Fix your remote control device to its box. template. First insert the upper part and then press and turn until its com- pletely closed. N.B.: The connection is not polarized. 6. Check in the boiler if there is a request to eliminate the jumper on the room thermostat terminals (if installed).
  • Page 15 7. Supply power to the boiler. As soon as the connection is established the normal operating condition will be dis- Now the installation is completed. If it was played: done correctly the remote control device is now powered and the LCD display will show the following message for a few seconds: N O R D G A S...

  • Page 16: Configurating Operating Parameters

    Errors in the configuation of your instead of the temperature the param- EASYREMOTE remote control device eter value. The parameter number will may lead to malfunctioning. be blinking. This operation configures the remote...
  • Page 17 4. Turn button to select the param- eter number to be displayed. The temperature display will show the corresponding parameter value. 5. Press button : to change this value. The corresponding parameter value will start blinking. 6. Turn button to change the dis- played value.
  • Page 18 played room temperature in order to • P03 - Differential operation temper- compensate any possible error. ature ON • P01 - Room anti-frost Start temper- It is the value to be subtracted from the ature Range room setpoint in order to define the start It defines the start temperature for of the Central Heating Demand.

  • Page 19: Disabling Thermo-Regulation

    6 - Disabling thermo-regulation In case the remote controller is installed inside a generic environment and you do not need to control its temperature (i.e.garage, boiler room…), you can dis- able the Central Heating demand request trough proper configuration of parameter P04 = 4 (see chapter 5 - Configurating operating parameters).

  • Page 20: Selecting Operating Mode

    7 - Selecting operating mode Subject to the type of boiler con- 1. OFF: all requests for boiler are disa- nected, some of the following modes bled. may not be available. Select the operating mode of the boiler by pressing key several times.
  • Page 21 2. SUMMER: the boiler is enabled to 3. WINTER: the boiler is enabled to pro- only produce domestic hot water. duce domestic hot water and to heat the room. N O R D G A S E A S Y R E M O T E...
  • Page 22 4. ONLY HEATING: the only operation No matter which function has been mode enabled is heating. selected, the room anti-freeze function is always operative (cfr. respective sec- tion). N O R D G A S E A S Y R E M O T E...

  • Page 23: Setting Up Clock And Temperature

    8 - Setting up clock and temperature SELECTED Subject to the type of boiler con- ID ICONS STATUS nected, some of the following modes may not be available. DOMESTIC To set the clock and the temperature set HOT WATER points of this remote control device and of TEMPERATURE the boiler press key several times.

  • Page 24: Setting Up Clock

    2. Turn button to set the required 8.1 - Setting up clock value. 1. Press key : the hour will blink. 3. Press button to confirm the input value. The hour will stop blinking and the minutes will start blinking. N O R D G A S E A S Y R E M O T E...
  • Page 25 4. Turn button to set the value you 6. Turn button to set the value you want. want. 5. Press button to confirm value. The 7. Press button to confirm value. The minutes stop blinking and the day of day of the week stops blinking and the week will start blinking.

  • Page 26: Setting Up Room Day Temperature

    8.2 - Setting up room DAY temperature 1. Press key until icon starts blinking. 2. Turn button to set the value you want. N O R D G A S E A S Y R E M O T E...

  • Page 27: Setting Up Room Night Temperature

    8.3 - Setting up room NIGHT temperature 1. Press key and release when icon starts blinking. 2. Turn button to set the temperature you want. N O R D G A S E A S Y R E M O T E...

  • Page 28: Setting Up Heating Temperature

    8.4 - Setting up HEATING temperature If the remote control device has been configured as modulating, this param- eter determines the max. temperature value as computed by the modulation algorithm. 1. Press key until icon starts blinking. 2. Turn button to set the value you want.

  • Page 29: Setting Up Domestic Hot Water Temperature

    8.5 - Setting up DOMESTIC HOT WATER temperature 1. Press key until icon starts blinking. 2. Turn button to set the value you want. N O R D G A S E A S Y R E M O T E...

  • Page 30: Setting Up Outside Probe Kd Value

    1. Press key until icon starts 8.6 - Setting up outside probe KD value blinking. This setting option is available only 2. Turn button to set the value you if the outside probe is connected, the want. remote control device is set as modu- lating and the use of the outside probe for modulation (P04 = 2 or 3) is ena- bled.

  • Page 31: Setting Up Clock And Temperatures

    9 - Setting up clock and temperatures If the operation mode selected is WINTER • In MANUAL mode the user selects the or HEATING ONLY, the EASYREMOTE room temperature he wants, and this device allows you to manipulate the room temperature will be maintained until a temperature either MANUALLY or AUTO- change is made.

  • Page 32: Manual Operation

    9.1 - MANUAL operation 1. Press key until icon appears. The central digits on the display will show the set temperature blinking. 2. Turn button to set the temperature you want. 3. After 30 secs the central display will go back to showing the current tem- perature.

  • Page 33: Automatic Operation

    9.2 - AUTOMATIC operation 1. Press button until the heating clock corona will be displayed. 2. Icon will light up to show which is the currently set tempera- ture level. N O R D G A S E A S Y R E M O T E...

  • Page 34: Weekly Heating Program

    10 - Weekly heating program When operation mode WINTER or HEAT- The display / change mode of the heat- ING ONLY is selected, the remote control ing program will be actuated by pressing device allows operation in AUTOMATIC ; the lighting of icon shows mode in which a priorly set program man- that it is on.

  • Page 35: Display Heating Program

    10.1 - Display heating program 1. Press key . Icons will appear on the display and show the first day of the week. Icons and the jumper are ON or OFF matching the DAY / NIGHT level of the displayed time. 2.

  • Page 36: Change Heating Program

    7. Turn button until it shows the time 10.2 - Change heating program period during which you want to keep 1. Press key . Icons the current level. will appear on the display and show 8. Press key to change the level the first day of the week.

  • Page 37: Weekly Storage Tank Program

    The EASYREMOTE remote control as he likes. device can run (same as for heating pro- The storage tank program display /...

  • Page 38: Display Storage Tank Program

    11.1 - Display storage tank program 1. Press key . Icons will appear on the display and show the first day of the week. 2. Press key . Icon will light up on the display and show the storage tank program.

  • Page 39: Change Storage Tank Program

    11.2 - Change storage tank program 1. Press key . Icons 6. Turn button to select the time you will appear on the display and show want. the first day of the week. 7. Press key to change boiler sta- 2.

  • Page 40: Temporary Change Room Temperature Set Point

    12 - Temporary change room temperature set point When operating in AUTOMATIC mode the room set point DAY ( ) / NIGHT ) can be increased or reduced. The change will be valid until the next level change (DAY-NIGHT) takes place. There- after it will be void.

  • Page 41: Fault Signalling

    13 - Fault signalling The remote control device will display any faults with code Exx blinking in place of the temperature display. To learn about the type of fault refer to the boiler instruction booklet. There can be two kinds of faults: those which can be restored by the user and those which cannot be restored.

  • Page 42: Not Restorable Faults

    13.2 - Not restorable faults You recognize these faults because icon sono identificate dall’accensione dell’icona will light up; these faults cannot be reset by the user but require technical service. Also code E66 falls under this error class (room temperature probe of remote control device in fault).

  • Page 43: Display Values

    ID ICON QUANTITY some of the below described functions may not be available. SYSTEM WATER Pressing key repeatedly your PRESSURE EASYREMOTE control device is able to display the following quantity values: TEMPERATURE SELECTED ID ICON TEMPERATURE QUANTITY SET ROOM TEMPERATURE...

  • Page 44: Display Set Room Temperature

    14.1 - Display set room temperature 14.2 - Display temperature domestic hot water probe This is the temperature set for the acti- vated temperature level (DAY - NIGHT This is the temperature read by the - MANUAL). domestic hot water probe fitted in the boiler.

  • Page 45: Display Temperature Delivery Probe

    14.3 - Display temperature delivery probe 14.4 - Display temperature outside probe This is the temperature read by the deliv- This is the temperature read by the out- ery probe fitted in the boiler. side probe connected to the boiler. N O R D G A S E A S Y R E M O T E...

  • Page 46: Display System Water Pressure

    14.5 - Display system water pressure This is the system water pressure. N O R D G A S E A S Y R E M O T E...

  • Page 47: Reset Of Default Values

    15 - Reset of default values If necessary the original values of the The restored values are as follows: remote control device as set by the man- • Temperature DAY: 20°C ufacturer can be restored. • Temperature NIGHT: 16°C • Temperature MANUAL: 20°C Weekly heating program Days...
  • Page 48 1. Move the remote control device to OFF position. 2. Press keys keep them pressed for longer than 5 secs. 3. The operation is confirmed when dEF appears on the display. N O R D G A S E A S Y R E M O T E...

  • Page 49: Complete Resetting

    16 - Complete resetting Faults or other technical reasons may Thereafter press key (1). require ‘complete resetting’ of the remote control device. For this operation the remote control device must be taken off its fixing tem- plate - do this by gently pressing with a screwdriver on the lower splines.

  • Page 50: Room Anti-Freeze Function

    17 - Room anti-freeze function The EASYREMOTE controller is able to support the room-antifrost function. In all the operating modes the central heat- ing demand is generated whenever the measured room temperature is lower then the activation threshold (parameter P01). This grants protection of the cen- tral heating installation from the freezing risk.
  • Page 51 As per Directive EMC CE 89/336 and Low Voltage Directive 2006/95/CE, the manufacturer: Nordgas srl Via XXV Aprile, 9 23841 Annone di Brianza (LC) CERTIFIES THAT the Remote Control Devices EASYREMOTE comply with above EC Directives Roberto Massina Managing Director...
  • Page 52 Manufactured by N N O VA T I V E A F E T Y Y S T E M R O D U C T S Nordgas srl - Via XXV Aprile, 9 - 23841 Annone di Brianza (LC)

Table of Contents