Download Print this page

Nanoseed IGNW-SKR-01 Instruction Manual

Silent nano diffuser

Advertisement

Quick Links

nanoseed
Product Instruction Manual
Thank you for choosing nanoseed silent nano diffuser. To use this product 
properly, please carefully read this product instruction manual before use 
and keep it safe for future reference.
 silent nano diffuser
IGNW-SKR-01
IGNW-SPN-01
IGNW-SNW-01

Advertisement

loading

Summary of Contents for Nanoseed IGNW-SKR-01

  • Page 1 IGNW-SKR-01 IGNW-SPN-01 IGNW-SNW-01 nanoseed  silent nano diffuser Product Instruction Manual Thank you for choosing nanoseed silent nano diffuser. To use this product  properly, please carefully read this product instruction manual before use  and keep it safe for future reference.
  • Page 2 Please read all instructions carefully before operating for safe use This instruction manual describes the points you should follow for prevention of human and property damages and for safe use. All the points are important for your safety. Please read carefully, under- stand them and follow the instructions to use the product properly.
  • Page 3 Warning Place to use ● Use in wet room such as bathroom and shower room is prohibited.   Don’ t use this product in bathroom or shower room.   It leads to electric leakages causing fire or electric shock. ● Installation in wet place is prohibited.  ...
  • Page 4 Warning Following cases and actions to take ● Fuming/Strange smell   Continuously using the device fuming or with strange ➡   smell may cause fire or electric shock. Plug off   immediately and contact seller for repair.   You must not attempt to disassemble it by yourself. ● In the case water goes inside the device ➡...
  • Page 5 Warning Prohibited conduct ● Disassembling and modification are prohibited   Don’ t disassemble and modify this product by yourself.   It may cause fire or electrical shock. ● Don’ t get wet   Don’ t expose this product including AC adapter   to water.  ...
  • Page 6 Caution ● Unstable installation is prohibited   Don’ t install the device on unstable table or in shaky   location. The device may fall or falling device may cause   injury. ● Always vertically put the device, otherwise leading to   product failure. ● Avoid placing the device near air conditioner or heating  ...
  • Page 7 heck the components ■ Product ●  Product components (Product, Cartridge tray, Filter, Filter tray) ■ Accessories ●  AC adapter ●  Cartridge (sample, 2 pieces) ●  Product instruction manual If you discover missing contents in the box or manufacturing defects in the manual, contact seller.
  • Page 8: Name Of Parts

    N ame of parts ■ Front Power light Power switch Operation indicator panel Left air outlet Right air outlet Front panel Cartridge tray ...
  • Page 9 ■ Rear Power connector  Filter Filter tray ■Cartridge tray Cartridge tray...
  • Page 10 ■ Upper Indicator panel Power light ●  Free Access Power switch ●  Pairing ●  Timer Mode Left air outlet Right air outlet...
  • Page 11 efore Use   Remove sealing film on cartridge before setting in a tray. ■Pull out a cartridge tray and set   the cartridge before power on. Remove sealing film on cartridge before  setting in a tray. ■If enjoy aromas, drop your favorite aroma oil in optional aroma cartridge. Setting cartridge The engine will work without cartridges in the trays. In this case, only ionic air is released from the air outlets. Although it won’ t damage the device, use the recommended cartridges to optimize the performance. (No guarantee on the performance if you use other cartridge)
  • Page 12 ■The filter have already set in the filter tray. Please check if the filter is in the filter tray. If you operate the device without filter, dust may atack to the engines  and may cause abnormal noise or product failure. Wash the filter at least once per month. The filter is consumable. If you feel the air from outlets get weaker, you may need to change the filters. Maintenance ■Please make sure to firmly plug the AC adapter plug into the device. Otherwise it may lead to plug damage or loose connection.
  • Page 13 ow to turn on the power   ■Press the power switch, the power light is on and starts working.  The flow indicator on front panel also starts blinking. Power switch Power light ●  Free Access ●  Pairing ●  Timer Mode Flow indicator (Right) Flow indicator (Left) ● About operation modes At the initial operation, both engines work intermittently (50%). The latest operation mode is saved when the switch is turned off and the same operation mode will be started when you restart.
  • Page 14 ode change   ■Push the power switch for two seconds and more, you can change the  operation mode. During changing operation mode, the power light is blinking. ●  Free Access Power switch ●  Pairing (Push here for 2 seconds and more) ●  Timer Mode Power light ●...
  • Page 15 witch operation mode   ■Push the power switch for two seconds and more, the power light starts blinking.  While the light is blinking, press the power switch again, you can change the mode. Power switch  (mode changing) ●  Free Access ●  Pairing Left air outlet Right air outlet ●  Timer Mode ■ The operation mode is changed every time you press the power switch in the following order: Operation mode Air outlet Air outlet color...
  • Page 16 hange cartridges   ■Cartridges are consumable.  Replacement cartridges are available.  Please contact seller. Regarding the aroma cartridge, add a few drops of your favorite aroma oil in it before use. Once the effect is gone, add it again as needed. Spare aroma cartridges are also available for those who want to enjoy several aromas.
  • Page 17 roubleshooting   ■ Check your current problem and see cause and solution ➡No (See p17) Is the power light on? ⬇ Yes ➡No (See p17) Are the indicators on front panel turned on or blinking? ⬇ Yes ➡No (See p18) Is the air outlets’ light on? ⬇ Yes ➡No (See p18) Is air (ionic air) coming out from the air outlets? When any liquid has splashed on equipment, or any objects has dropped through air-outlet,...
  • Page 18 a.No power light Problem Cause and solution ● Check AC adapter is correctly plugged into an outlet. No power light ● Plug other device’ s power plug into the outlet to check the outlet is working. ● See any damages on the AC adapter’ s code. If you can find any damages,  plug off immediately and contact seller for repair.
  • Page 19 c.The air outlets’ light does not work Problem Cause and solution ● Have you set one side operation mode?  ➡ The air outlet’ s light on the side on pause turns off. The air outlets’ light  ➡ See page 14 does not work Check the above mentioned points and switch on the power again. If the problem won’...
  • Page 20 To replace the battery, please contact seller. https://nanoseed.jp/ Manufacturer : nanoseed Inc. 1267-1 Nakagomi, Saku City, Nagano Pref. 385-0051 JAPAN 5th Edition / Nov.2018...

This manual is also suitable for:

Ignw-spn-01Ignw-snw-01