How To Operate - Youlong YL-20T88 Instruction Manual

HOW TO OPERATE

1. Power On
1) Plug in, the cooker alerts "Bi", all indicators flicker and then disappear.
2. Switch On
1) After power on, press "On/Off Button", LED screen shows "----", the cooker is ready for
heating.
2) Press reference button to enter reference heating mode.
3) The cooker will return to the state of power on if without any operation for 1 minute after
switch on.
3. Switch Off
1) When in heating or switch on, press "On/Off Button", the cooker will stop working and enters
into power on condition.
4. BBQ Function
1) When in switch on, press "Menu Button" to choose "BBQ LED", "BBQ LED" keeps
consistent on, the LED screen will show Power "3", press "Increase Button" or "Decrease
Button" to adjust the power.
2) Or press "Decrease Button" or "Increase Button" to enter into BBQ function.
3) Timer is not available in this mode.
5. Cooker Function
1) When in switch on, press "Menu Button" to choose "Cooker LED", "Cooker LED" keeps
consistent on, press "Increase Button" or "Decrease Button" to adjust the power.
2) Timer is available in this mode.
6. Timer
1) Timer is only available for cooker function. Time range from 1 minute to 10 hours.
2) In cooker function, press "Menu Button" again, "Cooker LED" and "Timer LED" keep
consistent on. The LED screen shows "0:10" (it means 10 minutes) with flicker.
3) Press "Increase Button" or "Increase Button" to adjust the time at the rate of one minute. Keep
pressing "Increase Button" or "Increase Button" to adjust the time at the rate of ten minutes.
4) It will be automatically confirmed in 5 seconds after you set the time.
5) In timer mode, the LED screen shows timer and power level alternately.
6) It will return to power off after the time elapse.
7. High Temperature Indicator
1) After finish cooking, the LED screen shows "-H-", it will disappear until the glass surface
temperature below 50°C.
9. Fan Keeps Working
1) The fan will keep working for 5 minutes for heat dissipation after finish cooking. It will stop
automatically until the glass surface temperature below 50°C.
4