Asaklitt N-003 Instruction Manual

Rechargeable
Pocket Torch
Art.no 36-5998 Model N-003
Please read the entire instruction manual before using
the product and then save it for future reference. We reserve
the right for any errors in text or images and any necessary
changes made to technical data. If you have any questions
concerning technical problems please contact our Customer
Services.
Safety
• Do not point the light beam into anyone's eyes.
• Do not let children play with the product.
• Never charge the torch in combustible atmospheres or
on flammable surfaces.
• Warning: Only use type 18650 rechargeable batteries.
• Use only the provided charger cable, connected to
a USB port, for charging the torch.
• Never use a defective charger cable.
• Never expose the torch to rain/moisture.
• Never expose the battery to high temperatures or
naked flames.
• Avoid contact with a leaking battery.
Care and maintenance
Clean the torch using a soft, damp cloth.
Never use cleaning agents or other chemicals.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.
Product description
• Rechargeable pocket torch with an adjustable focus beam,
5 W LED chip and aluminium housing.
• The torch is charged from a USB outlet via the included
charger cable.
GREAT BRITAIN • CUSTOMER SERVICE tel: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk
ENGLISH
1
5
6 7 8
1. Light beam adjuster
2. Battery holder
3. Magnetic connector for charger cable
4. Power switch
5. Type 18650 battery
6. Magnetic connector on charger cable
7. Charging indicator
8. Charger cable
9. USB port for connecting a charger cable
Charging the torch
The torch has a magnetic charger cable connection.
The torch can only be charged using the included charger cable.
1. Unscrew the battery
holder (2) and insert
the included rechargeable
type 18650 battery (5)
into it in accordance with
the polarity markings
in the battery holder.
Screw the battery holder back into the torch housing.
2. Connect the supplied charger cable (8) to a USB port/charger.
3. Place the magnetic connector on the charger cable (6) onto
the corresponding connector (3) on the torch. The charging
indicator (7) shines red when the torch battery is charging.
When the battery is fully charged the indicator shines green.
The first time the battery is charged, it will need at least
7½ hours to fully charge (applies when using a USB charger
providing a charging current of 1 A). If the torch is charged
from a USB port on a computer for
2 3 4
example, the charging time could be
twice as long.
4. The charger cable attaches to the torch
by magnetism, make sure that it is
positioned correctly.
Note: The charging time can
vary depending on the
charging source.
Operating instructions
• The torch can be switched on/off using the power
switch (4). Select the desired mode by pressing
the power switch the required number of times:
high power (200 lm) – low power (100 lm) – off.
9
• The torch also has a boost-mode, in which the torch
shines extra brightly (350 lm). The boost-mode is
activated as follows: Hold the power switch down for
about 4 seconds until the torch shines really brightly.
The boost-mode lasts for about 60 seconds and then
the torch enters high power mode.
• Adjust the light beam by moving the light beam
adjuster (1) forwards or backwards.
Specifications
Charging voltage
Battery
Operating time
Colour temperature
Colour rendition
Power
Lumens
Operating temperature −20 to +50 ºC
Size
Weight
5 V DC from a USB charger
(USB charger sold separately)
li-ion, 2800 mAh (type 18650)
Up to 3 hours (on high),
up to 6 hours (on low)
6000 K
Ra 70
5 W
350 lm (60 sec in boost-mode),
200 lm (high power),
100 lm (low power)
155 mm in length,
39 mm in diameter
205 g (incl. charger cable)