Keep the operating instructions at hand for further use. If you pass on the Brose components to third parties, please always include the respective user manual. 1. Safety Advice Read the user manual carefully ›...
(e.g. due to overload). unit distract you. If you do not focus solely on traffic, you › Do not make any changes to your Brose risk being involved in an accident. If you Drive System. Never try to increase the want to make a keypad entry apart from performance of your Brose Drive System.
The Brose Drive S g is 15 % smaller through the city – thanks to its particularly and 500 g lighter than the Brose Drive S Alu. harmonious handling, the Brose Drive C E-bikers can enjoy the maximum power of 90...
Page 7
EN | 18 Product Description | Brose Drive Magnesium housing 3.3. Technical Data * Check which drive version has been installed in Brose Drive with magnesium housing your e-bike using the article number on the drive unit. If the name is not recognisable, you can Material no.
4.1. Before First Use NOTE: Check all fixing screws regularly. Shocks, heat and cold can cause screws The Brose Drive System can only be activated to become loose. Tighten all screws to the if the following prerequisites are met: required torque or contact an authorised Inserting and removing the battery dealer.
Familiarisation your bicycle manufacturer and your bicycle Take some time to get used to the Brose Drive dealer. System before you use it in normal road traffic. Careful handling of the Brose Drive System Test the different levels of assistance until you feel confident in using the product.
NOTE: Have repairs done by a The fault display may indicate serious errors certified bicycle dealer only. in your Brose Drive system. Errors prevent the safe operation of the e-bike. There is a The fault display indicates fault that the risk of accidents involving personal injury and system can detect independently.
Page 11
EN | 22 Troubleshooting | Brose Drive Magnesium housing Symptom Possible cause Solution If possible, remove the battery and Battery not correctly clicked reinsert it. Pay attention that it is in into the holder. the proper position. Charge up fully using the supplied Battery not charged up.
23 | EN 7. Service 7.1. Maintenance and Cleaning The drive unit requires an inspection after 15,000 km by a Brose authorised service › Keep all components of your e-bike clean, centre. especially the battery contacts and all For e-bike service or repairs, please contact an exposed cable connections.
Page 13
(including late replacement of wear parts). environmentally friendly way. If Brose accepts a warranty claim, this in no machines, replacement parts case implies the assumption of liability for packaging are made of recyclable materials.
Page 14
Brose Antriebstechnik GmbH und Co. Kommanditgesellschaft, Berlin Sickingenstr. 29-38 10553 Berlin Deutschland Telefon: +49 30 343498 100 service.ebike@brose.com www.brose-ebike.com V 1.1 · 08/19 · de...
Need help?
Do you have a question about the E 57028 and is the answer not in the manual?
Questions and answers