Repeat Settings; Equalizer - Homder TF-10 User Manual

27
Repeat Settings
1. In Playback interface , press "M" button to enter the list of "Playback Settings".
2. Press " . . " or " " " button to
locate 咽epeat
Settings" , press "
0"
button to enter.
3. Press " " " or "
'."
button to
select 喂epeat
Times" and press "
0 "
button to enter ,
then press ". . " or " . . " to set a repeat times from 1 to 10 , lastly , press "
0 "
button to
confirm your selection
4. Press ". . " or " . . " button to
select 响epeatl阳rval"
and press
"0"
button to enter ,
then press " ..
四If " or " "固Il"
button to set a repeat interval from 1 second to 10 seconds ,
lastly , press
"0 "
button to confirm your selection.
Notes:
After setting the repeat times and repeat interval , if you choose a part of the recording
as A-B repeat , the part you chose will be played back based on you settings.
For example
,
the repeat times are 5 times and the repeat interval is 5 seconds
,
when
you choosing to use A-B repeat function , the recorder will repeat the part you chose
5 times and the interval of each playback is 5 seconds.
Equalizer
1. In playback interface
,
press "M" button to enter the list of "Playback Settings".
2.
Press""飞r" '. "
button to locate "Equalizer" , then press"
0 "
button to enter.
3. Press "
. ." or " . . " button to select an equalizer
from 响。ck/Fun k/Hip
hopl
JazzlClassical 1T echno" or tum this function off , press "
0 "
button to confirm
your selection.
Notes:
Li
stening to the recording/music through headphones , you will find the difference
between these playback modes.
28