Page 2
1. Set up your Spotlight. Set up your Ring Beams Bridge. The Bridge connects your Ring Beams lights to the rest of your Ring system. To set up your Bridge, follow the instructions in the Ring app or Bridge user manual.
Page 3
Insert the batteries. Set up your Spotlight in the Ring app. Twist and pull off In the app, tap the front of the light, Set Up a Device. then press the side When prompted, buttons on the battery select Beams and compartment to open.
Page 4
2. Install your Spotlight. Hold the base against the surface and drive the three mounting screws. Loosen the locking Insert your Spotlight screw on the base into the base at your and remove the base chosen angle and from your Spotlight. tighten the screw.
Page 6
Warnings This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference in a residential This device complies with part 15 of the FCC Rules and installation.
Page 7
from that to which the receiver is connected. de moin de 20 cm. Installer les antennes de facon à ce que • Consult the dealer or an experienced radio/TV technician le personnel ne puisse approcher à 20 cm ou moins de la for help.
Need help?
Do you have a question about the 5B11S8 and is the answer not in the manual?
Questions and answers