Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ELMARK Manuals
  4. Industrial PC
  5. msignage WS15
  6. Manual

ELMARK msignage WS15 Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Chapter 1
Overview
Thank you for choosing the msignage
cellent industrial computer system.
Based on the Intel
®
optimal system efficiency, the msignage
commodates the Intel
supports one DDR2 400/533 SO-DIMM slot to provide
the maximum of 1GB memory capacity.
WS15, an ex-
TM
945GSE and ICH7M chipset for
TM
Atom
N270 processor and
®
TM
WS15 ac-

Advertisement

loading
Need help?

Need help?

Do you have a question about the msignage WS15 and is the answer not in the manual?

Questions and answers

Summary of Contents for ELMARK msignage WS15

  • Page 1 Chapter 1 Overview Thank you for choosing the msignage WS15, an ex- cellent industrial computer system. Based on the Intel 945GSE and ICH7M chipset for ® optimal system efficiency, the msignage WS15 ac- commodates the Intel Atom N270 processor and ®...

  • Page 2: System Specifications

    ▍ ▍ OVERVIEW OVERVIEW yStem pecificationS Processor ■ Intel Atom processor N270 ® ■ Front Side Bus (FSB) 533 MHz ■ Thermal Design Power (TDP) 2.5 W ■ Highest Frequency Mode (HFM) 1.6 GHz ■ Lowest Frequency Mode (LFM) 800 MHz Chipset ■...
  • Page 3 msignage msignage WS15 WS15 Power Supply ■ 40 Watt Power Adapter with Active PFC ■ nput: 100-240V~, 50-60Hz 1.7A ■ Output: 20V, 2.0A Form Factor ■ 260 mm (W) X 180 mm (D) X 19 mm (H) ■ 1.08 Kg Operation Environment ■...
  • Page 4 ▍ ▍ OVERVIEW OVERVIEW yStem utlookS Right Side View Left Side View RJ-45 Connector The connector is used to connect a LAN cable for network connection. VGA Port The 15-pin-D-sub VGA port allows you to connect an external monitor or other standard VGA-compatible device (such as a projector) for a great view of the com- puter display.
  • Page 5 msignage msignage WS15 WS15 Card Reader The built-in card reader may support various types of memory card, such as MMC (Multi-Media Card), SD (Secure Digital), MS (Memory Stick) or cards. USB Port The USB 2.0 port allows you to connect USB-interface peripheral de- vices, such as the mouse, keyboard, modem, portable hard disk module, printer and more.
  • Page 6 ▍ OVERVIEW acking ontentS Power Adapter Power Cord misgnage WS15 Driver & Manual CD WLAN Antenna Back Mount Plate...

  • Page 7: System Assembly

    Chapter 2 System Assembly This chapter provides you with the information on system assembly procedures. While doing the instal- lation, be careful in holding the components and follow the installation procedures. For some components, if you install in the wrong orientation, the components will not work properly.
  • Page 8 ▍ SySTem ASSembly nStallatiOn OOlS A Phillips (crosshead) screwdriver and a flathead screw- driver, can be used to do most of the installation. Choose one with a magnetic head would be better. Pliers, can be used as an auxiliary tool to connect some connectors or cables.
  • Page 9 msignage WS15 SSembly rOcedureS Important • Choose the lCD less than 5.8 Kg for keeping the weight balance; otherwise, it may cause fall or related hazard. Step 1: Find the screw holes on the back of the lCD. Step 2: Use the corss-type screwdriver to fix the back mount plate with the attached screws.
  • Page 10 ▍ SySTem ASSembly Step 3: Hang the system on the back mount plate. Step 4: The screw on the bottom of the back mount plate can be used to fasten the system. Step 5: Remove the protector from the WlAN antenna connector.
  • Page 11 msignage WS15 Step 6: Install the attached WlAN antenna. Step 7: Connect the VGA cable between the system and the lCD. Step 8: Connect the adaptor and peripherals to the system.
  • Page 12 ▍ SySTem ASSembly Step 9: Turn on the system and enjoy it.

  • Page 13: Software Setup

    Chapter 3 Software Setup This chapter provides you with the information on software configurations. You can set the layout, resolution, multimedia or text bar as your desire. The schedule table allows you to control the precise chan- nel playing.
  • Page 14 ▍ SofTware SeTup hannel dit and anageMent right click the on the system tray, you will see the pop-up menu. Select “edit” to enter the channel edit and management. ▶ add the channel / Modify the channel / Delete / Copy Channels after entering the channel edit, the window shows as below.
  • Page 15 msignage wS15 ■ add the Channel: Check, the shows up, you can fill a name for later identification and management. ■ Modify the channel: Check , there will be a pop-up menu which shows the existing channels. Se- lect the channel that you want to modify and click ■...
  • Page 16 ▍ SofTware SeTup ▶ Layout and Template The Setup2 window shows as below: Layout In the layout zone, you can choose the built-in resolution or set up according to your need. The unit is pixel. ■ resolution: The first item it your current monitor resolution or you can choose the built-in resolutions.
  • Page 17 msignage wS15 of X and Y to place the background picture to a precise position. If you do not have more than two screen outputs, please keep the value 0. Template Setup In the Template Setup, there are 5 basic templates for users to select. You can check and click for advanced adjustment.
  • Page 18 ▍ SofTware SeTup ▶ advanced Setup after the completion of the previous step, the following screen appears for advanced settings: This window is divided into 3 regions, the left is “Template Layout”, the upper right is “Module Size Location”, and the lower right is “Module property”. Template Layout You can click the module in different colors, each comes 8 adjustable points allow you to move or drag the module so as to change the X and Y value of coordinate and the...
  • Page 19 msignage wS15 ■ Digitalclock Module: Digitalclock Module can show the time (HH:MM:SS) and you can change the color, size, background colors, and so on. If you set the second, it will show the jumping effect to the second. ■ Delete Module: Select a module, right click and select Delete to delete it. ■...
  • Page 20 ▍ SofTware SeTup ▶ Channel Media Design after the completion of the previous step, it will enter channel media design, the fol- lowing window will appear: This window is divided into 3 regions: ”Modules area” is on the left, “Media Setting” is on the upper right and “Media Schedule”...
  • Page 21 msignage wS15 you could click the it and click to modify the text. The following window will appear as below: You can input text content in the screen then apply the effect by clicking these but- tons. ：Background color ：foreground color ：Bold ：Italic ：underline...
  • Page 22 ▍ SofTware SeTup ■ web page Module: If you click the below window for the website address input will appear . right click and select Set Time to set the playing duration of the website. You can input more website address and set switch time. Media Schedule This area can arrange the order, time and play mode of materials according to user’s demand.
  • Page 23 msignage wS15 repeat Mode plays the list in order. The end Time on the window shows the length of the material and can be adjusted manually. Set Time Mode allows you to set the start time of the material; thus the material will start at a certain time.
  • Page 24 ▍ SofTware SeTup ptiOn please right click the icon on the system tray，and then you will see a pop-up menu . please select option to get into the system setting. The following window shows up: ■ Start the channel while reboot: when this item is checked, the system will play the programmed channel automatically after boot.
  • Page 25 msignage wS15 ■ enable channel Default channel: The purpose of enable channel is to let users schedule the channels daily, weekly or at a certain time. for example, play channel a from 08:00~12:00 and play channel B from 12:00~17:00. If you want to play other channels that are out of the schedule, please check this option.
  • Page 26 ▍ SofTware SeTup hannel Chedule anageMent right click the on the system tray, the pop-up menu shows up. Select Schedule to enter the Channel Schedule Management. Below window will appear： The main purpose of Channel Schedule Management is to let users to insert some other channels to the present channels from a special time or period.
  • Page 27 msignage wS15 settings but still under the same layout. If you want to switch between channels and schedules, please use this function. Schedule edit You can pre-set a new channel for channel switch or insert. please see Channel edit and Manage for more information. Select a channel name and schedule mode.
  • Page 28 ▍ SofTware SeTup Schedule preview You can preview the current setting content at any time. Click to pre- view. You can click a date to preview the channel playing schedule from 00:00:00 to 23:59:59. after finished you can click: ■ to save all the settings and exit.

  • Page 29: Function Description

    msignage wS15 Oftware playing and OperatiOn MOde It provides hot keys for quick switch function and channel. right click on the system tray and you will find the function. Hot key as below： function Description Hotkey edit edit Channel edit & manage Ctrl + e Channel execute and Switch Channel...