Download Print this page
Land Pride 380-149A Installation Instructions
Land Pride 380-149A Installation Instructions

Land Pride 380-149A Installation Instructions

Third function valve kit
Hide thumbs Also See for 380-149A:

Advertisement

Quick Links

Third Function Valve Kit #380-149A
Installation Instructions
For B2320 Kubota Tractors with LA304 Loader,
B2620 Kubota Tractors with LA364 Loader, and
B2301 & B2601 Kubota Tractors with LA434 Loader
1
7
4
11
9
7
3
11
9
Figure 1
Notes
For color photos, visit
https://dealers.landpride.com/en/12036/dealer-training
and look for "Third Function Valves."
1.
This manual is written with the assumption that the
tractor is not supplied with rear remotes or backhoe.
2. This valve kit is designed to operate hydraulic
cylinders.
3. For further assistance write to:
Land Pride Service Department
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address: lpservicedept@landpride.com
Assembly Instructions
Assembly Instructions
Initial Preparations
1.
Park tractor on a flat surface, place gear shift lever in
park, turn off engine, and remove ignition key.
Valve Assembly
Refer to Figure 1 & Figure 2:
1.
Attach valve assembly support bracket (#1) to
existing holes "C" on right-hand side of loader frame
with M18-2.5 x 100 bolts (#7), 3-1/4" long tube (#3),
3-1/2" long tube (#4), flat washers (#11), and
nuts (#9) as shown. Tighten nuts (#9) to the correct
torque.
2. Route hydraulic hoses (#16 & #22) under the tractor
platform and rearward toward the loader valve.
© Copyright 2019
Printed
5/3/19
C
37026
Connect Hydraulic Hoses to Power
Beyond Ports
1.
2. Loosen lug nuts on right rear wheel. Do not remove
3. Jack right rear wheel off the ground and place a jack
4. Lower right rear axle onto the jack stand. The rear
5. Remove lug nuts and right rear wheel.
6. Locate and remove the steel tube that is connected
Manual No. 380-151M
Attach to
positive (+)
post on the
tractor battery
Right-
Hand Side
Figure 2
IMPORTANT: Land Pride recommends that your
dealer connect hydraulic hoses (#16 & #22) to your
tractor's power beyond ports. Improper hook-up
could cause damage to your tractor or valve.
Place chocks in front and back of tractor's left rear
wheel.
lug nuts at this time.
stand under the right rear axle.
wheel should be slightly off the ground. Make sure
jack stand is secure and will not slip out from under
the tractor axle.
to the power beyond port.
Left-Hand
Side
37027
1

Advertisement

loading

Summary of Contents for Land Pride 380-149A

  • Page 1 Third Function Valve Kit #380-149A Installation Instructions For B2320 Kubota Tractors with LA304 Loader, Manual No. 380-151M B2620 Kubota Tractors with LA364 Loader, and B2301 & B2601 Kubota Tractors with LA434 Loader Left-Hand Side Attach to positive (+) post on the...
  • Page 2 Refer to your tractor Operator's Manual for recommended hydraulic fluid 8. Secure wiring with cable ties (#5) as needed. and procedure for checking hydraulic fluid level. Third Function Valve Kit #380-149A Installation Instructions Manual No. 380-151M 5/3/19...
  • Page 3 (#13). 3. Connect hoses to quick couplers (#21) on “A” & “B” ports of valve block (#13). 4. Secure hydraulic hoses (#24) as needed with cable ties (#5). 5/3/19 Third Function Valve Kit #380-149A Installation Instructions Manual No. 380-151M...
  • Page 4 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...