HPV Salsa Instructions For Use

Preheating trough
Please note:
Is there a high flame from the burner nozzle? → Preheating was not adequate and
must be repeated.
The two small flames inside the burner are preheating flames and should always be
burning.
When controlling the burner flame, please make sure the preheating flame will not
go out.
To discontinue using your stove:
→ Turn the valve screw clockwise to shut off the supply of spirit. Be absolutely
sure to keep the valve screw closed to prevent spirit from leaking.
Care and maintenance
→ Exclusively use clean spirit only.
→ Wipe off leftovers with a soft moist cloth. Do not use any abrasive or corrosive
cleaning agents.
→ Make sure the injector orifice and the preheating opening do not get plugged up.
If they do, they must be cleaned using a needle or a thin wire.
→ After use (for extended periods of nonuse), drain the spirit from the tank.
Subject to change in terms of design or color without notice.
Heidersdorfer Produktions- und Vertriebsgesellschaft mbH * Saydaer Str. 18 * 09526 Heidersdorf * Germany
Phone: +49 (0)37361 4640 * Facsimile: +49 (0)37361 46464 * E-Mail:
burner nozzle
info@hpv-dmbh.de
85270/11/2017
Instructions for use
Spirit stove
Before using your spirit stove, please thoroughly study the safety information
provided herein and these instructions for use. The material and workmanship of this
product are such that malfunctions will be excluded if it is properly used as intended.