Summary of Contents for Aratek A600
- Page 1 USER DOCUMENT Aratek A600RDService Aratek RD Service for ANDROID Devices Version: 1.0.1 Page 1 of 10...
- Page 2 Aratek A600RDService Version Editor Checked Date 1.0.1 Ram Mohan G Rajanarsaiah S 2020-02-29 Version: 1.0.1 Page 2 of 10...
- Page 3 Aratek A600RDService Table of Contents Introduction ............................... 4 Requirement ..............................4 S/W and H/W Requirement ........................4 Prerequisites for S/W ..........................4 Prerequisites for H/W ..........................4 Installation steps ............................4 FAQs ............................... 10 Version: 1.0.1 Page 3 of 10...
- Page 4 Aratek A600RDService Introduction Requirement Requirement of the document is to provide step by step process of A600 Aratek RD Service for Android application. S/W and H/W Requirement Prerequisites for S/W Android Smart phone having OS version from 5.0 or above.
- Page 5 Aratek A600 RDService application, initial screen display NOT READY in Status. Connect A600 USB scanner to Android device, will detect the device and show the popup for USB permission as below image. Tap on check box to allow FP device connect with Android device.
- Page 6 Aratek A600RDService Ready Status indicates both Biometric scanner device and Android connected properly. Tap on dropdown, select Settings option to change application configuration. Tap to select Settings popup menu Version: 1.0.1 Page 6 of 10...
- Page 7 Aratek A600RDService From below screen you can edit settings as per your application. Click each option to edit changes as per application designed. Environment, Image Quality, Capture Timeout, FIR Compression. To check RD service firmware details, tap on menu options then select About.
- Page 8 After Successful connectivity, use any UIDAI authentication application will prompt below screen for Finger Capture. Finger scanning Place your Captured Success finger on A600 scanner Note: If Biometric capture unsuccessful frequently, check in Setting Enable LED Capture ON option to get capture success, Refer below screenshots for clear understanding.
- Page 9 Aratek A600RDService Tap on check box to Enable LED on A600 Device for Capture Version: 1.0.1 Page 9 of 10...
- Page 10 Q. A600 devices certified for Level 0 or Level 1? A. Level 0. Q. What is RD Service? A. RD Service is an application provided by Aratek. This application for capture Fingerprint from A600 device and doing Authentication or e-kyc. Q. How to install Aratek A600 RD Service? A.
Need help?
Do you have a question about the A600 and is the answer not in the manual?
Questions and answers