Operation 4 5 6 - Hoover Power Wash 1 User Manual

Please read General Safety Information at the beginning before use.
Always make sure the pressure washer and water supply is off before connecting or disconnecting the hose and accessories.
Assembling your pressure washer
Attach the handle to the top of
the machine and slide until it
clicks into place.
IMPORTANT: Always make sure the trigger safety lock is in the LOCKED position when not in use or connecting/disconnecting the pressure hose.
Always check water hose, pressure hose, lance and accessories are not damaged broken or worn before use.
After connecting pressure hose, lance and accessories check they are securely fitted and locked in place before turning on.
Preparing your pressure washer for use
Push the pressure hose firmly to the water
outlet and turn the pressure hose collar
clockwise until tight.
Whilst firmly pushing the lance
into the trigger handle turn clockwise
to lock into position.
Place the Pressure hose and power cable
storage hook into position and fasten the
two screws to lock it into place.
UNLOCKED
LOCKED
A trigger safety lock is located underneath the handle.
The safety lock should always be in LOCKED position
before connecting/disconnecting the pressure hose
to the trigger handle.
To remove the lance from the trigger handle
firmly push and twist the lance anti-clockwise.
When unlocked pull to remove.
OPERATION
Attach the water inlet to the water
outlet, on the front of the unit, by
turning clockwise until tight.
To connect pressure hose to trigger handle, press the
pressure hose release button and push pressure hose
to lock into position. Gently pull the pressure hose
to check the connection.
4