Habasit BTM-1 Operating Instructions Manual page 2

Operating instructions – Belt tension meter BTM-1
Version 1.0
This disclaimer is made by and on behalf of Habasit and its affiliated companies, directors, employees,
agents and contractors (hereinafter collectively "HABASIT") with respect to the products referred to herein
(the "Products").
SAFETY WARNINGS SHOULD BE READ CAREFULLY AND ANY RECOMMENDED SAFETY PRECAUTIONS BE
FOLLOWED STRICTLY! Please refer to the Safety Warnings herein, in the Habasit catalogue as well as
installation and operating manuals.
All indications / information as to the application, use and performance of the Products are
recommendations provided with due diligence and care, but no representations or warranties of any kind
are made as to their completeness, accuracy or suitability for a particular purpose. The data provided
herein are based on laboratory application with small-scale test equipment, running at standard conditions,
and do not necessarily match product performance in industrial use. New knowledge and experience may
lead to re-assessments and modifications within a short period of time and without prior notice.
EXCEPT AS EXPLICITLY WARRANTED BY HABASIT, WHICH WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, THE PRODUCTS ARE PROVIDED "AS IS". HABASIT DISCLAIMS ALL
OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT, OR ARISING FROM A
COURSE OF DEALING, USAGE, OR TRADE PRACTICE, ALL OF WHICH ARE HEREBY EXCLUDED TO THE EXTENT
ALLOWED BY APPLICABLE LAW. BECAUSE CONDITIONS OF USE IN INDUSTRIAL APPLICATION ARE OUTSIDE OF
HABASIT'S CONTROL, HABASIT DOES NOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND
PROCESS ABILITY OF THE PRODUCTS, INCLUDING INDICATIONS ON PROCESS RESULTS AND OUTPUT.
2