Orange Lighting ORL Ekra 20DC Mounting Instruction

ORL Ekra 20/40/DC residential luminaire
Post top diameter:
1.
Protection grade:
2.
Certifications:
3.
Needed tools:
4.
5. Installation order:
a. Make sure power is off when starting.
b. Unpack the luminaire.
c. Guiding the power cable into the pole, and
position the luminaire on top of the pole.
d. Position the luminaire with the arrow and
Orange Lighting brand logo on canopy to
the street side and tighten the 6 bolts with
a 4mm allen wrench with a torque value
of 5Nm.
6. Repair or Maintenance
a. Make sure power is off when starting.
e. Secure the fixtures upper side with one
hand and use a 10mm Allen wrench to
untighten the fixation cap with your other
hand by turning anti-clockwise.
f. Lift up the canopy with two hands.
g. The canopy can be secured by putting the
hook on the inner side of the canopy
inside
the recessed border of the fixture.
h. By closing the canopy position the arrows
of the canopy in line with the mark on the
luminaire. Secure the luminaire upper side
with one hand and use a 10mm allen
wrench to tighten the fixation cap with
your other hand by turning clockwise with
a torque value of 20Nm. Tighten the cable
gland with the tubular box spanner to
secure the cable gland.
Adres: Marssteden 61, 7547 TE Enschede.
Mail: info@orangelighting.nl
Tel: 053-3030220
60 mm
IK10, IP66
CE, ENEC, Dekra Led Perf.
- 4mm allen wrench
- 10mm allen wrench
Mounting Instruction
5Nm
20Nm
Vs 1.3