Do you have a question about the Striker VR and is the answer not in the manual?
Questions and answers
Summary of Contents for KAT VR Striker VR
Page 1
KAT Striker VR Game Controller Owner’ s Manual Warning: This product is not an imitation firearm. Please use it according to the instructions. Tips:Thank you for purchasing our product. Please read this manual carefully, and pay attention to all included instructions before using KAT Striker. Keep...
Index Foreword Declaration Safety Instructions Product Introduction Product Description Product Appearance Product Parameters Installation & Use List of Items Precautions Installation Instructions Instructions for Use Adjustment Method Controllers Charging Other After-Sales Service Contact Information...
Foreword Declaration is the trademark of Hangzhou Virtual and Reality Technology Co., Ltd. All trademarks, product identification and trade names of other companies appearing in this manual are owned by their respective owners. No parts or content of this manual may be copied or reproduced without the written permission of the company, and may not be shared in any form or used for any commercial or profitable purpose.
Safety Instructions To avoid injury or damage to the product, read and follow all assembly and operation instructions before using KAT Striker. During the use of this product by a child, an adult guardian should always be present to ensure safety. Please use the device according to proper instructions or under the guidance of a professional to avoid damage.
Violation of the above safety instructions, as well as any other misconduct may cause personal injury or adverse consequences for which KAT VR will not be responsible. Those who use this device are considered to have full capacity of civil conduct and have complied with the aforementioned matters.
Installation & Use Please check and confirm the parts in the package carfully. List of Items Item Name Quantity Barrel 1 piece Grip 1 piece Stock 1 piece Main Body 1 piece Controller Lower Fixing 1 piece Controller Upper Fixing 1 piece Regulator 1 piece...
Installation Instructions Install the grip on the main body of the device. Connect the barrel with the main body by docking it, and rotating 90 degrees clockwise.
Page 9
Connect the stock with the main body by docking it, and rotating 90 degrees counterclock- wise. Mount the regulator mounting groove onto the guide rail located below the barrel. Then, fasten the screw after finding the optimal position for the regulator.
Page 10
Enter a game, and turn on both controllers. Identify the one responsible for the shooting - hereinafter referred to as the main controller. Open the main body of the device, and mount the main controller in its grip. Close the main body of the device, and tighten the screws clockwise.
Page 11
Install the upper, and lower parts of the fixing on the secondary controller. Rotate them until the controller is stably fastened in between. Please, confirm the correct position of the left and right notches on the controller. Attach the controller to the regulator located on the guide rail beneath the barrel.
Instructions for Use Adjustment Method Double hand grip .The sub-handle Regulator position and stock can be quickly separated, and length could be adjusted by combined with the main body. the user. Controllers Charging The controller can be safely charged at any time without removing it from KAT Striker.
Other After-Sales Service Please, read the following warranty instructions carefully to ensure the warranty is valid. The warranty period for this product is 3 months. If the product fails during its warranty period, manufacturing defects are discovered or any other issues occur due to production problems, the company shall provide free maintenance, and defective components replacement.
Need help?
Do you have a question about the Striker VR and is the answer not in the manual?
Questions and answers