Download Print this page

Active forever BC-08581-2A Manual

Hitch bike platform

HITCH BIKE PLATFORM

PART LIST

Wheel Holder

Platform

1. For 2" receiver. Carries up to 2 bikes (max 15kg/33lbs per bike).

2. Check periodically to assure that the bikes have not moved and that even weight distribution is

being maintained.

3. It is the owner's responsibility to periodically check to assure all hardware, straps, etc. are securely

tightened for continued safety.

. Do not create any downward vertical force on any part of the carrier when securing and tying

the bike(s) to the carrier . Excessive downward vertical force beyone the carrier's load capacity

may cause damage to the carrier, bikes and/or vehicle.

Do not install bike racks on trailers, campers or RVs.

Clamp Assembly

Main Tube Assembly

Strap

Nut, Nylock

Washer

BC-08581-2A

Hitch Mount Assembly

olt,Hex Head

Table of Contents

Do you have a question about the BC-08581-2A and is the answer not in the manual?

Page 1 HITCH BIKE PLATFORM BC-08581-2A PART LIST Clamp Assembly Wheel Holder Main Tube Assembly Hitch Mount Assembly Strap Nut, Nylock Washer Platform olt,Hex Head Warnings: 1. For 2" receiver. Carries up to 2 bikes (max 15kg/33lbs per bike). 2. Check periodically to assure that the bikes have not moved and that even weight distribution is being maintained.
Page 2 Be sure to insert the safety pin. STEP 2. Slide Clamp Assembly into Main Tube Assembly by STEP 1. Assemble Main Tube Assembly with Bolt and Nut , pressing the spring pin to secure it into the hole. Slide the assembly(Base Tube) into the receiver. Be sure to insert the safety pin.