Table of Contents
Advertisement
Quick Links
Shenzhen Med-link Electronics Tech Co., Ltd
4th and 5th Floor, Building Two, Hualian Industrial
Zone, Xinshi Community, Dalang Street, Longhua
District, 518109 Shenzhen, CHINA
Fax:+86 755 61120055
E-mail:kefu@medxing.com
Website:www.medxing.com
Shanghai International Holding Corp. GmbH (Europe)
Eiffestrasse 80, 20537 Hamburg, Germany
Tel: +49-40-2513175
Fax: +49-40-255726
IRT101B/IRT101
Digital Infrared Thermometer
R
E
V
A
Please read the user manual carefully before using this device.
.
*
0
The picture is for reference only, the actual item is the standard.
User Manual
Advertisement
Table of Contents
Related Manuals for Medxing IRT101B
Summary of Contents for Medxing IRT101B
- Page 1 IRT101B/IRT101 Digital Infrared Thermometer Shenzhen Med-link Electronics Tech Co., Ltd 4th and 5th Floor, Building Two, Hualian Industrial Zone, Xinshi Community, Dalang Street, Longhua District, 518109 Shenzhen, CHINA Fax:+86 755 61120055 E-mail:kefu@medxing.com Website:www.medxing.com Shanghai International Holding Corp. GmbH (Europe) Eiffestrasse 80, 20537 Hamburg, Germany...
-
Page 3: Table Of Contents
Important Safety Instructions Table of Contents 1) Check this device before use to ensure it has not been damaged. If yes, please stop to use it. 1. Important Safety Instructions 2) Do not immerse this device in water or other liquids. 3) Do not put this device in a low or high temperature environment for a long time. -
Page 4: Device Introduction
Device Introduction Working Mode Intended use: This digital infrared thermometer is intended to measure human body, object and ambient temperature. 3.1 OFF mode ①Removable cover There is no any display on LCD in OFF mode. (for forehead mode) If the clock has not been set successfully the device will switch off automatically when without operation for 30 seconds in MEASUREMENT mode. -
Page 5: Setting Mode
3.4 SETTING mode 6) Press SET button ⑤ to confirm the voice status then ready for measurement. NOTE: During the above procedures if no operation for 10 seconds the device will In MEASUREMENT mode press SET button ⑤ the device will enter into SETTING mode. -
Page 6: Temperature Measurement
2) Place the removable cap on forehead and press START button for about one Temperature measurement second and then release the button when heard a “be” sound. (The “be” sound will not be heard if the voice function has been closed.) 5.1 Ear mode 3) Read the recorded temperature from the LCD display. -
Page 7: Troubleshooting
Troubleshooting Warranty This device is covered by a 5 year warranty from the date of purchase. The warranty The Table listed below explains how to troubleshoot the Digital Infrared is valid only on presentation of the warranty card completed by the dealer confirming Thermometer. -
Page 8: Device Symbols
The customer or the user of the model equipments must be disposed of compliance with Medical in accordance with the local Device Directive IRT101B/IRT101 should assure that it is used in such an environment. applicable regulations, not with 93/42/EEC. domestic waste. 0123 is the Notified Body Emissions test Compliance Electromagnetic environment –... - Page 9 To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the model IRT101B/IRT101 is used exceeds the applicable RF compliance level above, the model IRT101B/ IRT101 should be observed to verify normal operation.
- Page 10 Recommended separation distances between portable and mobile RF communications equipment and the model BP-10P The model IRT101B/IRT101 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the model IRT101B/IRT101 can help prevent electromagnetic interference by...
Need help?
Do you have a question about the IRT101B and is the answer not in the manual?
Questions and answers