Summary of Contents for Twin Cut Power Saw+
- Page 25 Blade Safety Instructions Blade Replacement Procedure...
- Page 26 REMOVAL OF USED BLADES 1. Unplug the saw and allow blades to cool. 2. Rotate the blades until holes in both the blades are aligned. Then place pin attached to the wrench through holes in blades. Unscrew Lock Nut by rotation in counterclockwise and remove (see Fig.7).
- Page 27 MOUNTING OF REPLACEMENT BLADES See the accessories section of this manual for the proper replacement blades that are needed for this saw. 1. Unplug the saw. 2. Lay the saw down with the blade arbor pointing upward. Open the lower guard (Fig.4).
-
Page 28: Safety Precautions
Circular saw blades Correct use The circular saw blades are used for ripping, cross cutting and cutting grooves in wood, woodan materials, other similar materials or composites. If the system is not used as directed, the machine and / or the saw blades can be damaged or fragments of the saw blade might break away.
Need help?
Do you have a question about the Power Saw+ and is the answer not in the manual?
Questions and answers