Page 1
EADBOARD AND OOTBOARD M BEFORE STARTING THE ASSEMBLY PROCEDURE, READ ALL DIRECTIONS WITH CARE. M YOU WILL NEED THE FOLLOWING FOR THE ASSEMBLY OF YOUR LEGACY BED: enclosed Allen Wrenches a & b #1 & #2 phillips screwdrivers slotted screwdriver...
Page 3
Place each screw or bolt on the diagram of the item which is sketched actual size. Be sure to use the proper size specified in the assembly directions. If a part is missing or broken contact your Legacy dealer or Child Craft, P.O. Box 444, Salem, IN 47167-0444 USA, 812-883-3111, http://www.childcraftindustries.com for replacement part(s) or instructional literature.
Page 7
BE USED TO CLEAN THIS FINE FURNITURE. STORAGE AND USE OF YOUR LEGACY CRIB/TODDLER BED/FULL SIZE HEADBOARD & FOOTBOARD: A printed plastic pouch is attached to the crib spring for the permanent storage of the assembly directions. After completing the assembly process you are advised to read and be aware of all WARNINGS, CAUTIONS, CLEANING, STORAGE, USE AND MAINTENANCE notices contained in this set of directions and printed on the plastic pouch located on the underneath side of the crib spring.
Page 8
AGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR SHARP TERS), WITH A THICKNESS EDGES. DO NOT USE CRIB IF ANY PARTS ARE MISSING OR BRO- KEN. ASK YOUR DEALER OR WRITE TO LEGACY, P.O. BOX 444, NOT EXCEEDING 6 INCHES SALEM, IN 47167-0444 USA (812)-883-3111) FOR REPLACEMENT (15 CENTIMETERS).