Osmond ERGOFIT Instructions

1. SEAT HEIGHT
Lift the lever on the right-hand side
and take your weight off the seat to
raise the height. Remain seated to
lower the height. Release the lever
to lock the seat height.
4. SEAT ROCK TENSION
Twist the knob on the underside of
the chair while in seat tilt
adjustment mode to adjust the
tension of the movement.
ERGOFIT - INSTRUCTIONS
2. BACK ANGLE
To adjust the angle of the backrest,
lift the rear lever on the right-hand
side and lean the backrest to the
desired position. Return the lever to
the downward position to lock the
backrest in place.
5. BACK HEIGHT
To adjust the height of the backrest,
grasp the bottom of the backrest
and raise to the desired height. To
allow the backrest to be lowered
again, raise the backrest all the way
to the top and lower it to its lowest
position.
3. SEAT TILT ADJUSTMENT
Lift the middle lever on the right-
hand
side to release the seat tilt lock.
Tilt the seat while seated. Push the
lever back down to lock the seat
tilt.
6. LUMBAR SUPPORT
As you are sitting on the chair
squeeze bulb, located underneath
the left-hand side of the seat,
repeatedly to inflate the lumbar
support. Press the button on the
bulb to deflate the lumbar support.