Subscribe to Our Youtube Channel
Related Manuals for ViscoTec PreeFlow plug’n’dose TP
Summary of Contents for ViscoTec PreeFlow plug’n’dose TP
- Page 1 Dosing system Speed Control plug’n’dose operating and maintenance instructions Translation of the German original operating manual...
- Page 2 Printed 20.1.12...
-
Page 3: Table Of Contents
plug’n’dose TP operating and maintenance instructions Contents Introduction Function description Scope of supply Safety Informal safety measures - - - - - - - - - - - - - - - - - - - - - - - 5 Use of symbols - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Correct use, warranty - - - - - - - - - - - - - - - - - - - - - - - - - 5 Qualifications of the operators and maintenance personnel - - - - - - 5... -
Page 4: Introduction
plug’n’dose TP operating and maintenance instructions Introduction Dear customer, Congratulations on the purchase of your control unit. We are confident that it will meet all of your requirements. We trust that the unit will give you trouble-free and successful service. The plug’n’dose TP dosing system consists of a dosing control and a dispenser. -
Page 5: Safety
plug’n’dose TP operating and maintenance instructions Safety Informal safety measures » The operating and maintenance instructions should always be kept at the location where the control unit is in use. » General and local regulations on health, safety and environmental protection must also be provided and complied with. -
Page 6: Organisational Measures
plug’n’dose TP operating and maintenance instructions Organisational measures The necessary personal protective equipment must be provided by the operating organisation. All safety devices that are fitted must be checked regularly. Safety glasses and overalls must be worn during operation and cleaning to provide protection against any splashes of chemicals. -
Page 7: Operation
plug’n’dose TP operating and maintenance instructions Operation Before the control unit is operated, the safety information in Chapter 4, Safety, beginning on page 5, must have been read and understood. Displays and controls / connections Item Function, description Displays the operating modes •... -
Page 8: Starting Up
plug’n’dose TP operating and maintenance instructions Starting up Caution: The dispenser lead (connector 3) may only be connected and disconnected when the power supply is isolated. The electronics in the drive motor could be damaged if this precaution is not taken. •... -
Page 9: Operation
plug’n’dose TP operating and maintenance instructions Operation The control unit is operated according to the signals of time the pressure adapter that are present at connector (4) (see 5.2). The dispenser is regulated by the factors 'pressure' and 'time'. • more pressure = more volume flow •... -
Page 10: Disposal
This unit complies with RoHS requirements. EC-Declaration of Conformity n accordance with the EC-Machinery Directive 2006/42/EG, Appendix II A ViscoTec Pumpen- und Dosiertechnik GmbH Amperstraße 13 D-84513 Töging hereby declare that the machinery described below complies in its design and construction and in the version marketed by us with the basic safety and health requirements of the EC Directive 2006/42/EG. - Page 11 plug’n’dose TP operating and maintenance instructions letzteSeite Notizen Copyright © Version 1.3 11 / 11...
Need help?
Do you have a question about the PreeFlow plug’n’dose TP and is the answer not in the manual?
Questions and answers