Silencer SL-RF02 Quick Manual
Silencer SL-RF02 Quick Manual

Silencer SL-RF02 Quick Manual

Lcd remote control transceiver

Advertisement

Quick Links

LCD REMOTE CONTROL TRANSCEIVER:
A.
CHANGING THE BATTERY
BATTERY REPLACEMENT: SLRF752
The Two-Way remote transmitter is powered by one "AAA" Battery. When the power of the battery weakens
A
icon shall be displayed on the LCD screen. When the old battery is replaced, there will be beep sounds to
indicate the power is back up on the transmitter.
B.
STANDARD LCD ICON CONFIGURATIONS
The lock icon will be displayed when
The security system arm with hidden
alarm function (silent alarm)
Trunk Trigger
Shock Sensor Trigger (Zone 5)
No Icon = Shock Sensor Bypass
With Icon = With Shock Sensor
Icon Flashing = Shock Sensor trigger
the door are locked.
Hidden Alarm Mode
Door Trigger (Zone 1)
Door is illegally opened
(Zone 2)
Trunk is illegally opened
Hood Trigger (Zone 3)
Hood is illegally opened.
:
The unlock icon will be displayed
All the function shall be temporally on hold
when the door are unlocked.
Valet Mode
Door Ajar
Trunk Ajar or
Trunk Release
Hood Ajar
Tilt Sensor Trigger
(Zone 6)
No Icon = Tilt Sensor Bypass
With Icon = With Tilt Sensor
Icon Flashing = Tilt Sensor trigger
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SL-RF02 and is the answer not in the manual?

Questions and answers

Summary of Contents for Silencer SL-RF02

  • Page 1 LCD REMOTE CONTROL TRANSCEIVER: CHANGING THE BATTERY BATTERY REPLACEMENT: SLRF752 The Two-Way remote transmitter is powered by one “AAA” Battery. When the power of the battery weakens icon shall be displayed on the LCD screen. When the old battery is replaced, there will be beep sounds to indicate the power is back up on the transmitter.
  • Page 2 Ignition Trigger (Zone 4) Icon flash) Ignition switch was illegally System Trigger or Panic mode turned on. Engine Cranking Engine Running Your vehicle engine cranking by remote Your vehicle’s engine is running control. Timer Control Start Display the set up Running time Engine starts automatically every interval 2 / 3 / 24 Hours 2 or 3 hours...
  • Page 3 Press and hold the button for 1.0 seconds first Silent Disarm & Two Steps Door Unlock 1.0sec. then press button. Press and hold for 3 seconds Trunk Release (Aux 1) While the system is disarmed Passive Arming By-Pass Press button once. Activate or Deactivate the Remote Start Press twice if set to start safety mode.
  • Page 4 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

Table of Contents