Advertisement
Quick Links
13
Press and hold the plus button for ten seconds. Flow
14
indicators 1, 3 & 5 will be illuminated and columns will be
reset. Release the plus button. Press the power button
to turn on the concentrator and use normally.
Your Equipment Provider:
Your Physician:
326 Bollay Drive,
Goleta, CA 93117
1-877-4-INOGEN (Toll Free)
1-877-446-6436 (Toll Free)
1-805-562-0515 (International)
info@inogen.net
www.inogen.com
PMS 661 main color/651 swish
Connect the power supply cord from
the concentrator and plug into an
electrical outlet. Do Not Power
On the concentrator.
96-05438-00-01 A
Column Change Procedure
Advertisement
Summary of Contents for Oxy-Pam Inogen at Home
- Page 1 Connect the power supply cord from the concentrator and plug into an electrical outlet. Do Not Power On the concentrator. Column Change Procedure Press and hold the plus button for ten seconds. Flow indicators 1, 3 & 5 will be illuminated and columns will be reset.
- Page 2 Lay the concentrator down on its side. There are two columns (metal tubes) in the concentrator located behind the particle filter. These two columns will be removed and Press the two latch buttons on the sides of the device to replaced when service is required.
Need help?
Do you have a question about the Inogen at Home and is the answer not in the manual?
Questions and answers