Quick Installation; Basic Operation; Indicator Lights - Tripp Lite Line Conditioner 230V Owner's Manual

200204171 LR604 Owner's Manual.qxd

Quick Installation

1 Connect your equipment to
the line conditioner, and the
line conditioner to an
electrical outlet.
1) Unplug your computer's power cord
from both your AC outlet and your
computer's AC input.
2) Insert the line conditioner's cord's (A)
female plug into your computer's AC
input. Insert its male plug into any of
the line conditioner's output receptacles.
3) Insert the female plug of your
computer's cord (B) into your line
conditioner's AC input. Insert its male
plug into your AC outlet.
2 Plug your computer and
electronics into your line
conditioner's outlets.
3 Turn your line conditioner's
power switch on.

Basic Operation

Indicator Lights

Your line conditioner has up to 3 indicator lights. All indicator light descriptions apply when the
line conditioner is plugged into a wall outlet and turned on. Note: As the line conditioner
corrects high or low input voltage, the unit will make a gentle clicking sound. The frequency of
the clicking will depend on the quality of the utility power in your particular area. The clicking
is normal, and no action is required on your part.
Boost
Normal
Trim
5/30/02
BOOST (Multiple LED Models Only): This yellow light will turn
ON whenever your line conditioner is boosting low AC line voltage up
to nominal voltage levels.
NORMAL (Multiple LED Models Only): This green light will turn
ON whenever your line conditioner is receiving normal AC line
voltage.
TRIM (Multiple LED Models Only): This yellow light will turn ON
whenever your line conditioner is trimming high AC line voltage down
to nominal voltage levels.
3
10:53 AM Page 3
A
1
2
3
B