Advertisement
GA11 − Installation
Shatter Resistant
Hinge
Eyeshield
Mounting Arm
Wheel Guard
Clamp
P.O. Box 2400, Fort Smith, AR 72902-2400 U.S.A., Ph: (1) 479.646.4711, Fax (1) 479.648.5792, International Fax (1) 479.648.5895
© Baldor Electric Company
MN909
Baldor GA11 eyeshield is furnished with a mounting arm of round steel which is U−shaped at
the mounting end. The slot in the U bend is sized for 5/16" diameter screw. This slot slides over
a screw which is tapped into the inside of the guard. The mounting arm is held in position with a
metal clamp, supplied with the eyeshield as standard equipment. The Baldor GA11 eyeshield may
readily be mounted onto any make tool grinder,and anywhere else a 5/16" or smaller screw can be
used to hold the clamp and arm supplied with each eyeshield as standard equipment. Drawing at
right shows mounting fittings and method of attaching eyeshield.
Mounting Screw
Baldor Electric Company
www.baldor.com
All Rights Reserved. Printed in USA.
9/03
Advertisement
