Step 4: Stick Name Plate To Finish Install Keyboard. - I-Tech DKP Series Replacement Instructions

2. Unscrew two screws to take rubber pad and rubber pad holder out.
Then install keyboard.
3. Install two screws to combine rubber pad with rubber pad holder and keyboard
membrane. Then install two screws to combine keyboard cover.
•^-r^>vt#rtf
4. Stick name plate to finish install keyboard.
j-TECH i-Tec h Compa ny LLC
C O M P A N Y TOLL FREE: (888) 483-2418 • EMAIL
i"
* — *
mm
^u^n;;
a ea
n
infoSitechlcd.com
Install Keyboard Instruction
• WEB: www.iTechLCD.com