LiquidRed BTA A3 Mounting Instructions

Mounting Instructions for products with
Wonder-Mount mounting system
(BTA-LR_VSA-03-v1.3)
Thank you for purchasing this
ENGLISH
CAUTION
The wall fasteners provided with the installation kit are for convenience purpose only and are
not suitable for all types of installations. It is the ultimate responsibility of the installer to ensure
that the product is mounted correctly and securely. These installation instructions are to be
used as a guide as every installation is different. These installation instructions are only suitable
for installation on a Masonry wall.
PRODUCT LIMITED GUARANTEE
All components of chrome plated bathroom accessories are guaranteed
against any manufacturing defects for a period of 5 years from date of purchase, excluding
any special color finishes which are guaranteed against any manufacturing defects for a
period of 1 year from date of purchase, as printed on the sales docket, which must be
provided as proof of purchase. Excluded from this warranty are damages resulting from force
majeure (Acts of God), including but not limited to lightning and floods, fair wear and tear,
misuse, wilful damage, negligence, repair of device without the approval of
damage resulting from incorrect installation. The manufacturer's liability is limited to repair or
replacement of the bathroom accessories only. No claim for consequential damage and/or
labour and/or transport will be entertained. Damages arising from misuse of the bathroom
accessories will render the warranty invalid. This warranty is only valid when the product has
been purchased from an authorised reseller or country/territory distributor and is only valid
within the geographical borders of the country/territory that it was originally purchased. This
warranty only extends to the original purchaser of this product and is not transferable.
DO NOT clean with Tile Grout cleaner or any other cleaner with an acid or chlorine base.
Warranty will be void if these cleaning products are used.
NOTE
Products in diagrams used are for graphical representation only, actual products may vary from
model to model.
1. Tools and Fasteners Supplied:
(all other tools and fasteners shown are not supplied)
x1 x2 - Single Mounting x2 - Single Mounting
x4 - Double Mounting x4 - Double Mounting
*Due to the fact that is always actively researching new methods and/or materials with a view
to further improving our products you may notice some differences between the parts you received and the
assembly method described herein. Please understand that this instruction leaflet is intended as a guide only.
2. Stick Mounting Template to Wall
Peel off backing
Product.
or
4. Drill Holes
Drill pilot hole
Water pipe warning
Pilot Hole = Ø 4.0mm [
Ensure Accessory is level and stick to wall Remove Accessory, Template remains
Remove Template
Ceramic Tiles
Ø 6mm [ / in]
1
4
Masonry
3 / in]
16
3. Mark Holes
Drill sizing hole -Note: Accurate hole
size is important to secure Accessory
to the wall
Water pipe warning
Masonry
Sizing Hole = Ø 6.0mm [ 1 / in]
4
Mark holes in case Template becomes loose
during drilling
Ensure sufficient hole depth
5mm
[ 3 / in]
16
40mm [1 5 / in]
8